{"title":"Biomass stove accessories","description":"Once the appliance has been chosen based on the needs and an energy calculation of the premises, the appliance must be installed in the most correct way . To do this, in addition to acquiring commonly used tools and those specific for installation, it is necessary to purchase materials and accessories . In this section of the site you can find all the accessories useful for a correct installation . You can buy the installation kit or the single accessories such as brackets , pipe , sheath, conduits, etc.","products":[{"product_id":"pellet-loading-hatch-for-cadel-zefiro-9-insert","title":"Pellet loading hatch for CADEL Zefiro 9 insert","description":"\u003ch2 style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003ePellet loading hatch for CADEL Zefiro 9 insert\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The pellet loading hatch, \u003cstrong\u003eto be combined with the\u003c\/strong\u003e \u003cstrong\u003eZefiro 9\u003c\/strong\u003e \u003cstrong\u003efireplace\u003c\/strong\u003e insert by \u003cstrong\u003eCADEL\u003c\/strong\u003e , is the accessory that will make using the pellet insert more practical, fast and clean. In the absence of this hatch, the insert must be loaded by extracting the machine body from the structure. The trapdoor, which is mounted on the upper part of the insert by inserting its flexible tube on the tank, instead allows you to load the pellets into the machine in a much simpler and faster way. Just open the flap to load the insert tank with a scoop or using the chute supplied.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The trap door has small dimensions and, thanks to its black metal door, when closed it follows the line of the wall without ruining its aesthetics.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Width: mm 346 - Height: mm 250\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eWARRANTY\u003cbr\u003e\u003c\/strong\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eCADEL\u003c\/strong\u003e one and has a duration of 24 months.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Cadel","offers":[{"title":"Default Title","offer_id":44241406525604,"sku":"5018002","price":229.98,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/96c703fa01fce05b3fefa36cda8474d1.jpg?v=1775653194"},{"product_id":"winet-caminetti-montegrappa-wi-fi-module","title":"Winet Caminetti Montegrappa wi-fi module","description":"\u003cp\u003e\u003cstrong\u003eWinet Caminetti Montegrappa Wi-Fi module\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e The \u003cstrong\u003eCaminetti Montegrappa wifi module\u003c\/strong\u003e connects to the appliance's electronic card and allows you to manage it via smartphone, tablet or PC. Using the Browser it is possible to manage and monitor the \u003cstrong\u003eCaminetti Montegrappa pellet stoves\u003c\/strong\u003e .\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003cstrong\u003eMAIN FUNCTIONS:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e • Turning the device on and off\u003c\/p\u003e\u003cp\u003e • Power regulation\u003c\/p\u003e\u003cp\u003e • Regulation of the air temperature\u003c\/p\u003e\u003cp\u003e • Detection of the real temperature by the device\u003c\/p\u003e\u003cp\u003e • Device status.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e Compatible with \u003cstrong\u003eLato, Nodo, Tuga, Duglia pellet stoves.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e The guarantee is the official \u003cstrong\u003eCaminetti Montegrappa\u003c\/strong\u003e one and has a duration of \u003cstrong\u003e24 months\u003c\/strong\u003e .\u003c\/p\u003e","brand":"Caminetti Montegrappa","offers":[{"title":"Default Title","offer_id":44290659647652,"sku":"1532903900","price":166.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/66aebbdd2cf4e1a8daa64dd79cc9fece.jpg?v=1779720285"},{"product_id":"pellet-loading-drawer-for-cadel-zefiro-9-insert","title":"Pellet loading drawer for CADEL Zefiro 9 insert","description":"\u003ch2\u003e\u003cstrong\u003ePellet loading drawer for CADEL Zefiro 9 insert\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe drawer for loading pellets \u003cstrong\u003eto be combined with the\u003c\/strong\u003e \u003cstrong\u003eZefiro 9\u003c\/strong\u003e insert by \u003cstrong\u003eCADEL\u003c\/strong\u003e is one of the most useful accessories with which to enrich the machine. In fact, it will make the use of the pellet insert more practical, quick and clean. In its absence, the insert must be loaded by extracting the machine body from the structure. Thanks to the drawer, on the other hand, pellet loading operations will be simpler and faster: just remove the drawer from its guides, insert the pellets inside and push it towards the tank using the practical shovel provided.\u003c\/p\u003e\n\n\u003cp\u003eThe drawer mounts on top of the \u003cstrong\u003eZefiro 9\u003c\/strong\u003e insert and when closed integrates seamlessly into the design of the machine.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\nWidth: mm 697 - Height: mm. 75 - Depth: mm 500\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eCADEL\u003c\/strong\u003e one and has a duration of 24 months.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Cadel","offers":[{"title":"Default Title","offer_id":44290912518308,"sku":"5018001","price":213.04,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/214c7c2e1ef747c9e82fe69e979c73cf.jpg?v=1775653164"},{"product_id":"air-ducting-kit-for-cadel-zefiro-9-pellet-insert","title":"Air ducting kit for CADEL Zefiro 9 pellet insert","description":"\u003ch2 style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eAir ducting kit for CADEL Zefiro 9 pellet insert\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The kit proposed here, combined with the \u003cstrong\u003eCADEL Zefiro 9\u003c\/strong\u003e pellet fireplace insert, allows you to \u003cstrong\u003echannel the hot air\u003c\/strong\u003e produced by the insert \u003cstrong\u003einto a second environment\u003c\/strong\u003e .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The kit fits onto the left engine of the machine and allows the air coming out of its fan to be channeled to a room up to six meters away from the installation one.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The set, suitably installed and insulated, allows up to half of the heat produced by the \u003cstrong\u003eZefiro 9\u003c\/strong\u003e to be conveyed to the second room.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: 80mm.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eWARRANTY\u003cbr\u003e\u003c\/strong\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eCADEL\u003c\/strong\u003e one and has a duration of 24 months.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Cadel","offers":[{"title":"Default Title","offer_id":44290915696804,"sku":"5018005","price":51.68,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/917784cefb784a66785d0ce2aeba8491_c7adfd4b-c549-4354-9bfb-9068e80780bd.jpg?v=1775653222"},{"product_id":"frame-for-cadel-zefiro-9-pellet-insert-with-pellet-drawer","title":"Frame for CADEL Zefiro 9 pellet insert with pellet drawer","description":"\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e\u003cstrong\u003eFrame for CADEL Zefiro 9 pellet insert with pellet drawer\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e This frame, \u003cstrong\u003edesigned by CADEL for its Zefiro 9 pellet insert\u003c\/strong\u003e , is the accessory to be used to compensate and connect the structure of the insert with the edges of the surrounding masonry. Thanks to the flanges supplied, it is easily screwed to the structure of the insert and then to the masonry.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e Made of black painted metal, the frame elegantly completes the design of the Zefiro 9 pellet insert for fireplace to fit it even better into the wall that welcomes it.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e \u003cstrong\u003eAttention!\u003c\/strong\u003e This frame \u003cstrong\u003ematches the Cadel Zefiro 9 pellet insert when this is combined with the pellet loading drawer\u003c\/strong\u003e (code 5018001). If you choose not to combine the drawer for loading the pellets with the insert, the frame to be purchased will instead be the one with code 5018006 (available as an optional on Climamarket).\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e\u003c\/p\u003e\u003ch2 style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\n\u003c\/h2\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e Width 792mm - Height: 617mm\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e \u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003cbr\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eCADEL\u003c\/strong\u003e one and has a duration of \u003cstrong\u003e24 months\u003c\/strong\u003e .\u003c\/p\u003e","brand":"Cadel","offers":[{"title":"Default Title","offer_id":44313566216356,"sku":"5018007","price":120.82,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/9c81259384ea299f8097c41c2ec5689e.jpg?v=1775653274"},{"product_id":"frame-for-cadel-zefiro-9-pellet-insert-without-pellet-drawer","title":"Frame for CADEL Zefiro 9 pellet insert without pellet drawer","description":"\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e\u003cstrong\u003eFrame for CADEL Zefiro 9 pellet insert\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e This frame, \u003cstrong\u003edesigned by CADEL for its Zefiro 9 pellet insert\u003c\/strong\u003e , is the accessory to be used to compensate and connect the structure of the insert with the edges of the surrounding masonry. Thanks to the flanges supplied, it is easily screwed to the structure of the insert and then to the masonry.\u003c\/p\u003e\u003cp\u003e Made of black painted metal, the frame elegantly completes the design of the Zefiro 9 pellet insert for fireplace to fit it even better into the wall that welcomes it.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e \u003cstrong\u003eAttention!\u003c\/strong\u003e This frame \u003cstrong\u003eis combined with the Cadel Zefiro 9 pellet insert when this is not equipped with the pellet loading drawer\u003c\/strong\u003e (code 5018001). If you choose to combine the drawer for loading the pellets with the insert, the frame to be combined will instead be the one with code 5018007 (which can be purchased separately on Climamarket).\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e\u003c\/p\u003e\u003ch2 style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\n\u003c\/h2\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e Width 792mm - Height: 561mm\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e \u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003cbr\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eCADEL\u003c\/strong\u003e one and has a duration of \u003cstrong\u003e24 months\u003c\/strong\u003e .\u003c\/p\u003e","brand":"Cadel","offers":[{"title":"Default Title","offer_id":44316675899556,"sku":"5018006","price":97.53,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/9c81259384ea299f8097c41c2ec5689e_e33ba8b6-4119-4fed-8370-44c5d55ce8f3.jpg?v=1775653248"},{"product_id":"trapdoor-loading-kit-with-chute-for-ek63-pellek80-and-pellek110-pellet-insert","title":"Trapdoor pellet loading kit for EK63 PELLEK80 and PELLEK110+ EVO2 inserts","description":"\u003cp style=\"text-align:justify\"\u003e\u003cstrong\u003eTrapdoor pellet loading kit for EK63 PELLEK80 and PELLEK110+ EVO2 inserts - With chute\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003eThe trapdoor loading kit with chute for the EK63 PELLEK80 and PELLEK110+ pellet inserts \u003cstrong\u003eincludes: a trapdoor loader with a hinged door and a flexible hose\u003c\/strong\u003e with a flange, fastening clamps, and a frame around the mouth. This kit allows you to load pellets while the insert is on, using the trapdoor with a retractable chute located above the insert. Alternatively, without the kit, pellets can be loaded by simply removing the insert from its housing while it is turned off.\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e \u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e\u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003eThe guarantee is the official \u003cstrong\u003eEK63\u003c\/strong\u003e Edilkamin one and lasts \u003cstrong\u003e2 years\u003c\/strong\u003e.\u003c\/p\u003e\n","brand":"EK63","offers":[{"title":"Default Title","offer_id":47134297489746,"sku":"1167450","price":222.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/75ee451f625a293a362eb622371fc8e4_242869c5-0ce6-4c19-bc67-c6f8b59eea7d.jpg?v=1775871117"},{"product_id":"90-t-fitting-f-f-m-o-100-mm-for-pellet-stove-and-pellet-boiler-smoke-exhaust-in-steel","title":"90° T-fitting F\/F\/M Ø 100 mm - FOR PELLET STOVE AND PELLET BOILER SMOKE EXHAUST - IN STEEL","description":"\u003cp\u003e\u003cstrong\u003e90° T-fitting F\/F\/M Ø 100 mm - FOR PELLET STOVE AND PELLET BOILER SMOKE EXHAUST - IN STEEL\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e The AT 90° F\/F\/M fitting with a diameter of 100 mm is part of the Stabile NPS series flue gas exhaust systems.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e This single-wall flue is suitable for use with pellet-fired generators (stoves or boilers) with or without a fan in the combustion circuit. The system is certified to expel fumes with temperatures up to 200°C with gasket fitted and 300°C without gasket.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e The fitting is made of AISI 316L stainless steel, 0.4mm thick, with pre-assembled silicone gaskets; the black paint is powder coated according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e They enjoy the best classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e The STABILE NPS system is suitable for installation as a smoke duct, in compliance with the UNI 10683 standard, and is also certified for internal ducts and metal smoke ducts (EN 1856-2).\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e Installation must be carried out by qualified technical personnel.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e \u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:justify\u0026amp;nbsp\"\u003e The guarantee is the official Stabile Italia one and lasts \u003cstrong\u003e2 years.\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Stabile","offers":[{"title":"Default Title","offer_id":49679624307026,"sku":"NPSRT 09 D100","price":46.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/f63733f3f72953b776e9ab9906b05f71_5479c10f-1646-4f1d-b0c4-4ece05cb8d85.jpg?v=1779470866"},{"product_id":"edilkamin-kit-for-thermo-stove-installation-with-domestic-hot-water-production","title":"Edilkamin kit for thermo stove installation with domestic hot water production","description":"\u003cp\u003e\u003cstrong\u003eRW kit for installation for Vyda H 22 thermo stove, single heat source with domestic hot water production.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003cstrong\u003eEdilkamin\u003c\/strong\u003e offers a wide catalog of kits and accessories necessary and useful for the optimal functioning of its thermo stoves. The \u003cstrong\u003eRW Kit\u003c\/strong\u003e consists of:\u003c\/p\u003e\u003cp\u003e - high efficiency circulator with PWM control;\u003c\/p\u003e\u003cp\u003e - fill valve and drain valve;\u003c\/p\u003e\u003cp\u003e - safety valve;\u003c\/p\u003e\u003cp\u003e - connection for pressure gauge;\u003c\/p\u003e\u003cp\u003e - bypass;\u003c\/p\u003e\u003cp\u003e - connection to expansion tank incorporated in the thermo stove;\u003c\/p\u003e\u003cp\u003e - plate heat exchanger;\u003c\/p\u003e\u003cp\u003e - flow meter;\u003c\/p\u003e\u003cp\u003e - motorized 3-way valve.\u003c\/p\u003e\u003cp\u003e With transducer for displaying the water pressure.\u003c\/p\u003e","brand":"Edilkamin","offers":[{"title":"Default Title","offer_id":50678629728594,"sku":"805320","price":486.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/9e6802f70dde1e8372b275b498c7675e.jpg?v=1763374776"},{"product_id":"far-3-4-m-anti-condensation-valve-setting-60-c-for-solid-fuel-heat-generators","title":"FAR 3\/4 M anti-condensation valve, setting 60 ° C for solid fuel heat generators","description":"\u003ch2 style=\"\u0026amp;nbsptext-align:\" left\u003e\u003cstrong\u003eFAR 3\/4 M anti-condensation valve, setting 60 ° C for solid fuel heat generators\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003cstrong\u003eCod. 3966 0160\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eanti-condensation valve\u003c\/strong\u003e is a \u003cstrong\u003emandatory accessory in solid fuel boilers\u003c\/strong\u003e (such as pellet boilers) as it avoids the return of cold water to the boiler and the consequent formation of condensate which damages the heat exchanger; therefore it extends the life of the boiler. Operation is as simple as it is effective: the valve's thermostatic sensor detects the water temperature and, depending on the required value (60 ° C in this case), diverts its path by opening or closing the by-pass through a shutter.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eFAR anti-condensation valve\u003c\/strong\u003e can \u003cstrong\u003ealso\u003c\/strong\u003e be installed as a \u003cstrong\u003ediverter valve\u003c\/strong\u003e , in order to regulate the passage of water between the boiler and the system, according to the setting temperature.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e On the FAR anti-condensation valve there is a symbol of a flame that identifies the side of the valve on which to connect the heat generator. If used as anti-condensation, the valve must be installed on the return circuit; instead used as a diverter valve, it must be installed on the delivery. In any case, the valve must be positioned between three shut-off valves so that it can be isolated for maintenance.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Maintenance of this valve is quick and easy.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The setting of the FAR anti-condensation valve can also be changed by replacing the thermostatic bulb with one of a different setting (codes 9400 with the FAR brand).\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003ch2 style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eConstruction and technical features:\u003c\/strong\u003e\n\u003c\/h2\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Connections: 3\/4 M complete with unions and gaskets\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - CW617N brass unions with flat seat\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Body: CW617N brass\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - O-ring: EPDM\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Spring: AISI302 stainless steel\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Shutter: Plastic material\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Flow rate K v : 3.9 m 3 \/ h\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Maximum operating temperature: 100 ° C\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Maximum operating pressure: 10 bar\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Calibration temperature: 60 ° C (replaceable thermostatic sensor)\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - By-pass complete closing temperature: 70 ° C\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Usable fluids: water and mixed water glycol (max. 50%)\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eFAR Rubinetterie SpA\u003c\/strong\u003e guarantee and has a duration of \u003cstrong\u003e24 months\u003c\/strong\u003e .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"FAR","offers":[{"title":"Default Title","offer_id":50679683318098,"sku":"3966 0160","price":58.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/aa149ffa6b4bcbbe72330984806a102d.jpg?v=1778542942"},{"product_id":"far-3-4-m-anti-condensation-valve-55-c-setting-for-solid-fuel-heat-generators","title":"FAR 3\/4 M anti-condensation valve, 55 ° C setting for solid fuel heat generators","description":"\u003ch2 style=\"\u0026amp;nbsptext-align:\" left\u003e\u003cstrong\u003eFAR 3\/4 M anti-condensation valve, 55 ° C setting for solid fuel heat generators\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003cstrong\u003eCod. 3966 0155\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eanti-condensation valve\u003c\/strong\u003e is a \u003cstrong\u003emandatory accessory in solid fuel boilers\u003c\/strong\u003e (such as pellet boilers) as it avoids the return of cold water to the boiler and the consequent formation of condensate which damages the heat exchanger; therefore it extends the life of the boiler. Operation is as simple as it is effective: the valve's thermostatic sensor detects the water temperature and, depending on the required value (60 ° C in this case), diverts its path by opening or closing the by-pass through a shutter.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eFAR anti-condensation valve\u003c\/strong\u003e can \u003cstrong\u003ealso\u003c\/strong\u003e be installed as a \u003cstrong\u003ediverter valve\u003c\/strong\u003e , in order to regulate the passage of water between the boiler and the system, according to the setting temperature.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e On the FAR anti-condensation valve there is a symbol of a flame that identifies the side of the valve on which to connect the heat generator. If used as anti-condensation, the valve must be installed on the return circuit; instead used as a diverter valve, it must be installed on the delivery. In any case, the valve must be positioned between three shut-off valves so that it can be isolated for maintenance.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Maintenance of this valve is quick and easy.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The setting of the FAR anti-condensation valve can also be changed by replacing the thermostatic bulb with one of a different setting (codes 9400 with the FAR brand).\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003ch2 style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eConstruction and technical features:\u003c\/strong\u003e\n\u003c\/h2\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Connections: 3\/4 M complete with unions and gaskets\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - CW617N brass unions with flat seat\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Body: CW617N brass\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - O-ring: EPDM\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Spring: AISI302 stainless steel\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Shutter: Plastic material\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Flow rate K v : 3.9 m 3 \/ h\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Maximum operating temperature: 100 ° C\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Maximum operating pressure: 10 bar\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Calibration temperature: 55 ° C (replaceable thermostatic sensor)\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - By-pass complete closing temperature: 65 ° C\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Usable fluids: water and mixed water glycol (max. 50%)\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eFAR Rubinetterie SpA\u003c\/strong\u003e guarantee and has a duration of \u003cstrong\u003e24 months\u003c\/strong\u003e .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"FAR","offers":[{"title":"Default Title","offer_id":50679684825426,"sku":"3966 0155","price":60.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/aa149ffa6b4bcbbe72330984806a102d_50dc418d-db3a-424a-a7dd-4347cb35b9cc.jpg?v=1780509291"},{"product_id":"far-1-m-anti-condensation-valve-setting-60-c-for-solid-fuel-heat-generators","title":"FAR 1 M anti-condensation valve, setting 60 ° C for solid fuel heat generators","description":"\u003ch2 style=\"\u0026amp;nbsptext-align:\" left\u003e\u003cstrong\u003eFAR 1 M anti-condensation valve, setting 60 ° C for solid fuel heat generators\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003cstrong\u003eCod. 3966 0260\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eanti-condensation valve\u003c\/strong\u003e is a \u003cstrong\u003emandatory accessory in solid fuel boilers\u003c\/strong\u003e (such as pellet boilers) as it avoids the return of cold water to the boiler and the consequent formation of condensate which damages the heat exchanger; therefore it extends the life of the boiler. Operation is as simple as it is effective: the valve's thermostatic sensor detects the water temperature and, depending on the required value (60 ° C in this case), diverts its path by opening or closing the by-pass through a shutter.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eFAR anti-condensation valve\u003c\/strong\u003e can \u003cstrong\u003ealso\u003c\/strong\u003e be installed as a \u003cstrong\u003ediverter valve\u003c\/strong\u003e , in order to regulate the passage of water between the boiler and the system, according to the setting temperature.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e On the FAR anti-condensation valve there is a symbol of a flame that identifies the side of the valve on which to connect the heat generator. If used as anti-condensation, the valve must be installed on the return circuit; instead used as a diverter valve, it must be installed on the delivery. In any case, the valve must be positioned between three shut-off valves so that it can be isolated for maintenance.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Maintenance of this valve is quick and easy.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The setting of the FAR anti-condensation valve can also be changed by replacing the thermostatic bulb with one of a different setting (codes 9400 with the FAR brand).\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003ch2 style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eConstruction and technical features:\u003c\/strong\u003e\n\u003c\/h2\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Connections: 1 M complete with unions and gaskets\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - CW617N brass unions with flat seat\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Body: CW617N brass\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - O-ring: EPDM\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Spring: AISI302 stainless steel\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Shutter: Plastic material\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Flow rate K v : 3.9 m 3 \/ h\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Maximum operating temperature: 100 ° C\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Maximum operating pressure: 10 bar\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Calibration temperature: 60 ° C (replaceable thermostatic sensor)\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - By-pass complete closing temperature: 70 ° C\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - Usable fluids: water and mixed water glycol (max. 50%)\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eFAR Rubinetterie SpA\u003c\/strong\u003e guarantee and has a duration of \u003cstrong\u003e24 months\u003c\/strong\u003e .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"FAR","offers":[{"title":"Default Title","offer_id":50679687283026,"sku":"3966 0260","price":64.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/aa149ffa6b4bcbbe72330984806a102d_2a345699-4be9-46c5-88dd-a4f303119a9c.jpg?v=1780493173"},{"product_id":"freetime-plus-seitron-daily-digital-chronothermostat","title":"Freetime Plus Seitron daily digital chronothermostat","description":"\u003cp style=\"text-align:justify\"\u003e\u003cstrong\u003eDAILY DIGITAL CHRONOTHERMOSTAT WITH KNIGHTS BOILER CONTROL FREETIME+ SEITRON\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e\u003cstrong\u003eCode TCD01B\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e \u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003eThe \u003cstrong\u003eSEITRON\u003c\/strong\u003e \u003cstrong\u003eFREETIME+\u003c\/strong\u003e \u003cstrong\u003edigital chronothermostat\u003c\/strong\u003e \u003cstrong\u003ewith riders\u003c\/strong\u003e allows you to comfortably remotely control a boiler, a pellet stove, a heat pump or any other device that can usually be managed with a thermostat or on-off chronothermostat or with a switch, whether they are installed in the outside or inside the house.\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003eFREETIME+ is one of the most versatile and \u003cstrong\u003eeasy to use\u003c\/strong\u003e programmable thermostats. It is equipped with a \u003cstrong\u003ebacklit display\u003c\/strong\u003e through which it provides all the operating information. Suitable for all heating or cooling systems, it has a beautiful design that allows it to be placed in any environment, whether classic or modern.\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e \u003c\/p\u003e\n\n\u003ch2 style=\"text-align:justify\"\u003eGUARANTEED SAVINGS AND HIGH COMFORT\u003c\/h2\u003e\n\n\u003cp style=\"text-align:justify\"\u003eThe FREETIME+ SEITRON digital chronothermostat with riders has many functions and is \u003cstrong\u003every easy to program\u003c\/strong\u003e ! Its \u003cstrong\u003edisplay\u003c\/strong\u003e allows you to check all the functions and programming settings. Extremely easy to use because it offers daily time programming with time intervals specifically designed for the widest fields of use (they vary from 5 continuous hours for the 00:00-05:00 time band to adjustments in operating periods equal to 30 minutes each for the time band that goes from 05:00 to 09:00 and in operating periods equal to 60 minutes each for the time band that goes from 09:00 to 24:00). Each single operating period can manage a \u003cstrong\u003eComfort\u003c\/strong\u003e or \u003cstrong\u003eReduced\u003c\/strong\u003e operating band with temperatures that can be set for each of them using \u003cstrong\u003etwo comfortable and clear knobs\u003c\/strong\u003e with \u003cstrong\u003eindication of the degrees\u003c\/strong\u003e to be set; the knobs remain hidden under a cover which also hides the controls for programming the clock and the \u003cstrong\u003esummer\/winter function\u003c\/strong\u003e as well as the battery compartment. But FREETIME+ also allows \u003cstrong\u003emanual\u003c\/strong\u003e \u003cstrong\u003eswitching on\u003c\/strong\u003e and off of the boiler using a special button on the front panel together with the general switch-off button of the chronothermostat and the \u003cstrong\u003ebutton for displaying the room temperature or the current time\u003c\/strong\u003e .\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003eThe FREETIME+ digital chronothermostat also has the \u003cstrong\u003eAntifreeze Function\u003c\/strong\u003e with the possibility of setting the temperature to protect the system from any damage caused by too cold temperatures and the \u003cstrong\u003eHysteresis Adjustment Function\u003c\/strong\u003e to set the internal temperature difference between switching the device off and on again connected heating system (boiler, pellet stove, heat pump, etc.) when the set room temperature is reached.\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003eIt is also arranged for the \u003cstrong\u003econnection of a remote probe\u003c\/strong\u003e (not supplied in the package).\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e\u003cstrong\u003eInstallation is simple\u003c\/strong\u003e ; the chronothermostat is powered by two 1.5 V AA alkaline batteries for which the charge level is always shown on the display.\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e \u003c\/p\u003e\n\n\u003ch2 style=\"text-align:justify\"\u003eTECHNICAL FEATURES\u003c\/h2\u003e\n\n\n\u003cp style=\"text-align:justify\"\u003e- Powered by 2 x 1.5V AA batteries\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Battery life (years) \u0026gt;1\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Daily Programming\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Hot\/Cold On\/Off operation\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- 2 settable temperatures (Comfort - Reduced)\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Setting range 5 .. 35°C\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Adjustable antifreeze 0°C .. 25.0°C\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Internal NTC sensor (10K Ohm @ 25°C)\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Backlit 3-digit LCD temperature display\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Output (relay) 5(1)A @ 250V~ SPDT\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- IP30 degree of protection\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e- Class Reg.2013\/811\/CE IV = 2.0%\u003c\/p\u003e\n\n \n\n\n\u003cp style=\"text-align:justify\"\u003e \u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003e\u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"text-align:justify\"\u003eThe warranty is the official \u003cstrong\u003eSeitron\u003c\/strong\u003e one and has a duration of \u003cstrong\u003e24 months\u003c\/strong\u003e.\u003c\/p\u003e\n","brand":"Seitron","offers":[{"title":"Default Title","offer_id":50680127422802,"sku":"TCD01B0001SE","price":63.89,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/ba17fac325830506dc146497da9ae5a9_fbe85edf-31f8-4d9a-bd33-391b1a5d8920.jpg?v=1779781375"},{"product_id":"at-90-f-f-m-connector-stable-nps-o-80-mm-for-pellet-stove-and-pellet-boiler-smoke-exhaust-matt-black-steel","title":"AT 90° F\/F\/M CONNECTOR STABLE NPS Ø 80 mm - FOR PELLET STOVE AND PELLET BOILER SMOKE EXHAUST - MATT BLACK STEEL","description":"\u003cp\u003e\u003cstrong\u003e90° CONNECTOR AT FEMALE\/FEMALE\/MALE - Ø 80 mm - FOR SMOKE EXHAUST PELLET STOVE AND PELLET BOILER - IN STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis T-fitting is part of the \u003cstrong\u003eSTABILE NPS Flue System\u003c\/strong\u003e family.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the \u003cstrong\u003eSTABILE NPS Flue Gas System\u003c\/strong\u003e are designed to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures of up to 300°C if installed without a gasket, or up to 200°C when installed with a gasket.\u003c\/p\u003e\n\n\u003cp\u003eThe elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , 0.4 mm thick; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\n\n\u003cp\u003eThey enjoy the best classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\n\n\u003cp\u003eThey are complete with gaskets made of a black silicone elastomer, already mounted; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\n\n\u003cp\u003eThe products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; they comply with the EN 1856-2:2009 | 0407 | Istituto Giordano SpA regulation specifically for metal chimneys (internal ducts and metal smoke channels); they have obtained the CE marking Declaration of Performance no. 54 - DoP- 01.07.2013.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with the UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDiameter: Ø 80 mm.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARRANTY\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe guarantee is the official Stabile one and lasts \u003cstrong\u003e2 years.\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50681547456850,"sku":"NPSRT 09 D80","price":34.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/f63733f3f72953b776e9ab9906b05f71_e6a5ac58-cae1-42d5-b5e4-de7180a3eb72.jpg?v=1779470910"},{"product_id":"black-silicone-gasket-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"Black silicone gasket diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eBLACK SILICONE GASKET - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MATT BLACK COLOR - WITH TRIPLE SEALING LIP\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This silicone gasket is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of factory production systems (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682647380306,"sku":"18010","price":1.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/dc7a7bf581f688e2ed232c21d47d1ce1.jpg?v=1779485425"},{"product_id":"universal-remote-control-for-cadel-pellet-stoves","title":"Universal remote control for CADEL pellet stoves","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eUniversal remote control for Cadel pellet stoves and heating stoves\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The infrared remote control proposed here can be combined with all \u003cstrong\u003eCadel\u003c\/strong\u003e brand stoves and heating stoves as an optional accessory (for stoves that do not come with it as standard) or as a spare. It allows you to manage the main functions of these appliances: \u003cstrong\u003eswitching on and off\u003c\/strong\u003e , \u003cstrong\u003etemperature adjustment\u003c\/strong\u003e , operating \u003cstrong\u003epower adjustment\u003c\/strong\u003e , access to the stove management \u003cstrong\u003emenu\u003c\/strong\u003e . It works only with the display on the machine visible. Small and very light, it has clear and ergonomic keys. Its use is simple and intuitive.\u003c\/p\u003e\u003cp\u003e A CR 2025 lithium battery is required for operation.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Width: 33 mm - Height: 80 mm - Thickness: 6 mm\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eWARRANTY\u003cbr\u003e\u003c\/strong\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eCadel\u003c\/strong\u003e Italia one and has a duration of 24 months. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Cadel","offers":[{"title":"Default Title","offer_id":50682680672594,"sku":"5019012","price":29.12,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/922b89839e477d43c55ba5f809964e05_477c54dc-8ccf-444c-8735-347f46d3dbae.jpg?v=1775653300"},{"product_id":"wi-fi-module-for-cadel-pellet-stoves","title":"Wi-Fi module for CADEL pellet stoves","description":"\u003ch2 style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eWi-Fi module for CADEL pellet stoves\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The Cadel Wi-Fi kit for pellet stoves and thermo-stoves allows remote management of the brand's stoves that do not have the standard built-in module.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Thanks to the \u003cstrong\u003eCADEL\u003c\/strong\u003e \u003cstrong\u003eEasy Connect Plus\u003c\/strong\u003e App, the kit allows you to manage all the stove functions via \u003cstrong\u003esmartphone\u003c\/strong\u003e , \u003cstrong\u003etablet\u003c\/strong\u003e or \u003cstrong\u003ePC\u003c\/strong\u003e , both \u003cstrong\u003eAndroid\u003c\/strong\u003e and i \u003cstrong\u003eOS\u003c\/strong\u003e , from home or away, \u003cstrong\u003eat any time of the day\u003c\/strong\u003e .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e It is activated very simply and quickly connects to the available Wi-Fi network.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e It has a simple and intuitive graphical interface and is very easy to use.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eWi-Fi module\u003c\/strong\u003e allows you to manage various stove functions including:\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - switching on and off\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - set temperature\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - set power\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e - daily and weekly chronothermostat.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The module is to be installed near the stove or on it using the supplied velcros.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eWARRANTY\u003cbr\u003e\u003c\/strong\u003e The \u003cstrong\u003eguarantee\u003c\/strong\u003e is the official \u003cstrong\u003eCADEL\u003c\/strong\u003e one and has a duration of 24 months.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Cadel","offers":[{"title":"Default Title","offer_id":50682681098578,"sku":"5020017","price":110.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/fdf51bf230ae71f964c5b265c786fff6_131f6dd4-f2bf-4c70-a8c2-93fcb3516f96.jpg?v=1776778915"},{"product_id":"light-bronze-colored-metal-cladding-for-idro-river-cadel-pellet-stove","title":"Light bronze colored metal cladding for Idro River CADEL pellet stove","description":"","brand":"Cadel","offers":[{"title":"Default Title","offer_id":50682705379666,"sku":"6921004","price":115.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/506c6b078db3cf7a6fda669563f407f9_bbd6138e-43ab-47b5-a885-2d4f687a63ed.jpg?v=1775654916"},{"product_id":"ivory-colored-majolica-cladding-for-idro-river-cadel-pellet-stove","title":"Ivory colored majolica cladding for Idro River CADEL pellet stove","description":"","brand":"Cadel","offers":[{"title":"Default Title","offer_id":50682708099410,"sku":"6921007","price":382.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/50c6d7a9fc2fba550fe88faf90bbb9c9.jpg?v=1775654982"},{"product_id":"red-majolica-cladding-for-idro-river-pellet-stove-cadel","title":"Red majolica cladding for Idro River pellet stove CADEL","description":"","brand":"Cadel","offers":[{"title":"Default Title","offer_id":50682708787538,"sku":"6921008","price":383.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/a3c8d8c40a59a481273c02cdb0bfc8a2_6440959a-3ebf-4d5f-a892-c00532d73a6d.jpg?v=1775655007"},{"product_id":"black-wall-band-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"Black wall band diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eBLACK WALL CLAMP - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR - COMPLETE WITH FIXING DOWL\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This wall clamp is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family. It is complete with fixing dowel.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm.\u003cbr\u003e Total length: 245mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682851787090,"sku":"NFM 01 D100","price":10.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/25f59458efdf5a0a717533a0867b2994_2ab59dcb-99a2-4865-8ce5-a27211c4c664.jpg?v=1779474654"},{"product_id":"black-wall-band-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"Black wall band diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eBLACK WALL CLAMP - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR - COMPLETE WITH FIXING DOWL\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This wall clamp is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family. It is complete with fixing dowel.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm.\u003cbr\u003e Total length: 225mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682852245842,"sku":"NFM 01 D80","price":9.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/25f59458efdf5a0a717533a0867b2994_afed5e88-b50b-48bd-a879-8b1d1671d464.jpg?v=1779474680"},{"product_id":"wall-clamp-diam-100-for-pellet-stove-fume-exhaust-pipe-and-pellet-boiler-or-conventional-gas-boiler","title":"Wall clamp diam.100 for pellet stove fume exhaust pipe and pellet boiler or conventional gas boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eWALL CLAMP - FOR PELLET STOVE FUME EXHAUST PIPE AND PELLET BOILER OR CONVENTIONAL GAS BOILER\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003e- DIAMETER 100MM. - IN STEEL - MATT BLACK COLOUR\u003c\/strong\u003e \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This wall clamp is part of the \u003cstrong\u003eSTABILE AL-P Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE AL-P Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers or with conventional gas boilers, which expel fumes at high temperatures up to 200°C.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE AL-P\u003c\/strong\u003e series are made of highly resistant aluminium, the black powder coating is carried out according to the highest quality standards to last over time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They comply with EN 1856-1:2009\/ EN 1856-2:2009 standards. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length Diameter : Ø 100 mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682852802898,"sku":"NFM 03 D100","price":10.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/750fa5e58f0fa2db8fd617682db07921_ab095928-8696-4b7f-a094-bc78f4ccc976.jpg?v=1778416898"},{"product_id":"black-anti-intrusion-grille-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"Black anti-intrusion grille diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eBLACK ANTI-INTRUSION GRILLE - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This anti-intrusion grille is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of factory production systems (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682853523794,"sku":"NGA 01 D100","price":8.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/a9af613a0a1f861660d9bedc77a66c56_efb339b7-d65d-4027-bdf3-cb861c9ae093.jpg?v=1779474707"},{"product_id":"black-anti-intrusion-grille-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"Black anti-intrusion grille diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eBLACK ANTI-INTRUSION GRILLE - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This anti-intrusion grille is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682853884242,"sku":"NGA 01 D80","price":7.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/a9af613a0a1f861660d9bedc77a66c56_6316d918-f65d-4e21-be36-d5741d76817a.jpg?v=1780090940"},{"product_id":"chinese-hat-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"Chinese hat diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eCHINESE HAT - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This Chinese hat is part of the \u003cstrong\u003eNPS STABILE Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682854342994,"sku":"NPSCC 06 D100","price":51.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/d32ed15e37b10ea632761b4c13076ee3.jpg?v=1779474761"},{"product_id":"chinese-hat-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"Chinese hat diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eCHINESE HAT - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This Chinese hat is part of the \u003cstrong\u003eNPS STABILE Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682855031122,"sku":"NPSCC 06 D80","price":50.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/d32ed15e37b10ea632761b4c13076ee3_57557f15-29b1-46ac-9c26-72991d2fe8b5.jpg?v=1779474788"},{"product_id":"90-bend-m-f-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"90° bend M\/F diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e90° MALE\/FEMALE BEND - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This bend is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682855850322,"sku":"NPSCN 90 D100","price":29.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/26c4ef526320c3087b40288b6efb03a8_fcb3df34-7b5a-4684-b15d-f900521647ad.jpg?v=1779474815"},{"product_id":"90-bend-m-f-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"90° bend M\/F diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e90° MALE\/FEMALE BEND - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This bend is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of factory production systems (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682856341842,"sku":"NPSCN 90 D80","price":23.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/26c4ef526320c3087b40288b6efb03a8_f378a2ca-bac3-48d7-b1bd-a0229232ec88.jpg?v=1779474841"},{"product_id":"45-bend-m-f-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"45° bend M\/F diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e45° MALE\/FEMALE BEND - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This bend is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of factory production systems (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682856735058,"sku":"NPSCQ 45 D100","price":26.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/3ff10156acc0d67f58757697acd07cf8_bde2bbb8-3f45-47ee-b774-ddd66d0a6e8d.jpg?v=1779474868"},{"product_id":"45-bend-m-f-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"45° bend M\/F diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e45° MALE\/FEMALE BEND - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This bend is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of factory production systems (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682857062738,"sku":"NPSCQ 45 D80","price":20.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/3ff10156acc0d67f58757697acd07cf8_84de33fd-4ba6-452a-bc91-6d2a400cee43.jpg?v=1779474896"},{"product_id":"straight-element-m-f-diam-100-mm-length-1000-mm-flue-gas-outlet-pellet-stove-and-pellet-boiler","title":"Straight element M\/F diam. 100 mm length 1000 mm flue gas outlet pellet stove and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eSTRAIGHT ELEMENT LENGTH 1000 MM. MALE\/FEMALE - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This straight element is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length: 1000mm.\u003cbr\u003e Diameter 100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682857980242,"sku":"NPSED 01 D100","price":35.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/425d199b78793c617c34fe30ec68409f.jpg?v=1779474923"},{"product_id":"straight-element-m-f-diam-80-mm-length-1000-mm-flue-gas-outlet-pellet-stove-and-pellet-boiler","title":"Straight element M\/F diam. 80 mm length 1000 mm flue gas outlet pellet stove and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eSTRAIGHT ELEMENT LENGTH 1000 MM. MALE\/FEMALE - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This straight element is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length: 1000mm.\u003cbr\u003e Diameter 80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682858340690,"sku":"NPSED 01 D80","price":21.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/425d199b78793c617c34fe30ec68409f_03eed740-44b6-4e59-9100-d2917c5b0c6a.jpg?v=1779474951"},{"product_id":"straight-element-m-f-diam-100-mm-length-500-mm-flue-gas-outlet-pellet-stove-and-pellet-boiler","title":"Straight element M\/F diam. 100 mm length 500 mm flue gas outlet pellet stove and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eSTRAIGHT ELEMENT LENGTH 500 MM. MALE\/FEMALE - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This straight element is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length: 500mm.\u003cbr\u003e Diameter 100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682858668370,"sku":"NPSED 02 D100","price":22.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/557a4b903950eaebbdf5c0fdf2688c2d_af481284-d8d5-4b93-836d-191f200e68e6.jpg?v=1779474977"},{"product_id":"straight-element-m-f-diam-80-mm-length-500-mm-flue-exhaust-pellet-stove-and-pellet-boiler","title":"Straight element M\/F diam. 80 mm length 500 mm flue exhaust pellet stove and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eSTRAIGHT ELEMENT LENGTH 500 MM. MALE\/FEMALE - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This straight element is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of factory production systems (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length: 500mm.\u003cbr\u003e Diameter 80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682859061586,"sku":"NPSED 02 D80","price":18.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/557a4b903950eaebbdf5c0fdf2688c2d.jpg?v=1779475005"},{"product_id":"straight-element-m-f-diam-100-mm-length-250-mm-flue-exhaust-pellet-stove-and-pellet-boiler","title":"Straight element M\/F diam. 100 mm length 250 mm flue exhaust pellet stove and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eSTRAIGHT ELEMENT LENGTH 250 MM. MALE\/FEMALE - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This straight element is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length: 250mm.\u003cbr\u003e Diameter 100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682859749714,"sku":"NPSED 03 D100","price":18.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/7288d7136d27ec6cea3cc76011285737.jpg?v=1779475031"},{"product_id":"straight-element-m-f-diam-80-mm-length-250-mm-flue-outlet-pellet-stove-and-pellet-boiler","title":"Straight element M\/F diam. 80 mm length 250 mm flue outlet pellet stove and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eSTRAIGHT ELEMENT LENGTH 250 MM. MALE\/FEMALE - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This straight element is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length: 250mm.\u003cbr\u003e Diameter 80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682860208466,"sku":"NPSED 03 D80","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/7288d7136d27ec6cea3cc76011285737_cd5d2438-f26c-42a1-a1c0-e4ec6b717ce0.jpg?v=1779475057"},{"product_id":"straight-element-m-f-diam-100-mm-length-2000-mm-flue-exhaust-pellet-stove-and-pellet-boiler","title":"Straight element M\/F diam. 100 mm length 2000 mm flue exhaust pellet stove and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eSTRAIGHT ELEMENT LENGTH 2000 MM. MALE\/FEMALE - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This straight element is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length: 2000mm.\u003cbr\u003e Diameter 100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682861093202,"sku":"NPSED 04 D100","price":88.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/fdbe7707b007805b7fa578380341a887_0e414ecf-c815-4b35-92f2-631f2b4461ea.jpg?v=1779475083"},{"product_id":"straight-element-m-f-diam-80-mm-length-2000-mm-flue-outlet-pellet-stove-and-pellet-boiler","title":"Straight element M\/F diam. 80 mm length 2000 mm flue outlet pellet stove and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eSTRAIGHT ELEMENT LENGTH 2000 MM. MALE\/FEMALE - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This straight element is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Length: 2000mm.\u003cbr\u003e Diameter 80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682861617490,"sku":"NPSED 04 D80","price":60.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/fdbe7707b007805b7fa578380341a887.jpg?v=1779475109"},{"product_id":"telescopic-element-m-f-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"Telescopic element M\/F diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eMALE\/FEMALE TELESCOPIC ELEMENT - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This telescopic element is part of the \u003cstrong\u003eNPS STABILE Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682862207314,"sku":"NPSET 04 D100","price":32.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/0063e5177ed5b06c885e91a33c1b5ce6_222fd362-34f6-4268-86e2-3207f8a4a207.jpg?v=1779475136"},{"product_id":"telescopic-element-m-f-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"Telescopic element M\/F diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eMALE\/FEMALE TELESCOPIC ELEMENT - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This telescopic element is part of the \u003cstrong\u003eNPS STABILE Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682862960978,"sku":"NPSET 04 D80","price":28.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/0063e5177ed5b06c885e91a33c1b5ce6_35d54944-489f-468d-a93f-2bda3813a888.jpg?v=1779475177"},{"product_id":"black-locking-band-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"Black locking band diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eBLACK LOCKING CLAMP - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This wall clamp is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family. It is complete with fixing dowel.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682863550802,"sku":"NPSFB 19 D100","price":7.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/80037b8da36c2f99169e0980bf5016b1_2a72819b-4cd0-40ba-8975-b6ee27bd9b91.jpg?v=1779475207"},{"product_id":"black-locking-band-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"Black locking band diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eBLACK LOCKING CLAMP - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This wall clamp is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family. It is complete with fixing dowel.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of factory production systems (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682864173394,"sku":"NPSFB 19 D80","price":6.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/80037b8da36c2f99169e0980bf5016b1_497da6e2-2998-4bf3-b1ca-c025b72703e5.jpg?v=1779475234"},{"product_id":"f-f-sleeve-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"F\/F sleeve diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eFEMALE\/FEMALE SLEEVE - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This sleeve is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682864664914,"sku":"NPSRC 09 D100","price":19.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/0639c4bf14cd0ffe7ef03af7841c0973_5dce2942-d169-47cc-af78-d8735ed28d27.jpg?v=1779475261"},{"product_id":"f-f-sleeve-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"F\/F sleeve diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eFEMALE\/FEMALE SLEEVE - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This sleeve is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of factory production systems (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682865615186,"sku":"NPSRC 09 D80","price":14.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/0639c4bf14cd0ffe7ef03af7841c0973.jpg?v=1779475287"},{"product_id":"increaser-m-f-diam-male-80-mm-increased-to-female-100-mm-for-pellet-stove-fume-exhaust-and-pellet-boiler","title":"Increaser m\/f diam. male 80 mm increased to female 100 mm. for pellet stove fume exhaust and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eMALE INCREASER Ø 80 MM.\/FEMALE Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL\u003c\/strong\u003e \u003cstrong\u003e- MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This increaser is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Male diameter: Ø 80 mm.\u003cbr\u003e Female diameter: Ø 100 mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682866303314,"sku":"NPSRT 01 100-80","price":34.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/1710c2453eb875e37aa7a186e052d99a_d184c6ae-836e-4b2a-8c34-17bc095cfe82.jpg?v=1779475313"},{"product_id":"increaser-m-f-diam-female-120mm-for-pellet-stove-flue-gas-discharge-and-pellet-boiler-or-conventional-gas-boiler","title":"Increaser m\/f diam. female. 120mm. for pellet stove flue gas discharge and pellet boiler or conventional gas boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eINCREASE M\/F - PELLET STOVE AND PELLET BOILER OR CONVENTIONAL GAS BOILER FUMES\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003e-FEMALE DIAMETER 120 MM. - MALE DIAMETER 80 MM. - IN STAINLESS STEEL - MATT BLACK COLOR\u003c\/strong\u003e \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This increaser is part of the \u003cstrong\u003eSTABILE AL-P Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE AL-P Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers or with conventional gas boilers, which expel fumes at high temperatures up to 200°C.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE AL-P\u003c\/strong\u003e series are made of highly resistant aluminium, the black powder coating is carried out according to the highest quality standards to last over time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They comply with EN 1856-1:2009\/ EN 1856-2:2009 standards. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Female Diameter Length: Ø 120 mm.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Male diameter length: Ø 80 mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682866991442,"sku":"NPSRT 01 120-80","price":36.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/d78eb1c32014f72f7c16244abf8def37.jpg?v=1779475339"},{"product_id":"reducer-f-m-diam-male-100-mm-reduced-to-female-80-mm-for-pellet-stove-fume-exhaust-and-pellet-boiler","title":"Reducer f\/m diam. male 100 mm reduced to female 80 mm. for pellet stove fume exhaust and pellet boiler","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eMALE REDUCER Ø 100 MM.\/FEMALE Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL\u003c\/strong\u003e \u003cstrong\u003e- MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This reducer is part of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Male diameter: Ø 100 mm.\u003cbr\u003e Female diameter: Ø 80 mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682867679570,"sku":"NPSRT 02 100-80","price":38.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/d774e63e6cb09eb284bd2cb4bd411412.jpg?v=1779475364"},{"product_id":"condensate-drain-plug-diam-100-mm-for-pellet-stove-and-pellet-boiler-fume-exhaust","title":"Condensate drain plug diam. 100 mm for pellet stove and pellet boiler fume exhaust","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eCONDENSATE DRAIN CAP - Ø 100 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This condensate drain plug is part of the \u003cstrong\u003eSTABILE NPS Fume Drain System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø100mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682868695378,"sku":"NPSTC 85 D100","price":33.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/62bb63dd5895eb0508374f090ea41dd4_ecdefeda-e621-47d2-86bc-c846f406464c.jpg?v=1779475415"},{"product_id":"condensate-drain-plug-diam-80-mm-for-pellet-stove-and-pellet-boiler-fumes-outlet","title":"Condensate drain plug diam. 80 mm for pellet stove and pellet boiler fumes outlet","description":"\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003cstrong\u003eCONDENSATE DRAIN CAP - Ø 80 MM. - FOR PELLET STOVE AND PELLET BOILER FUME EXHAUST - MADE OF STEEL - MATT BLACK COLOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e This condensate drain plug is part of the \u003cstrong\u003eSTABILE NPS Fume Drain System\u003c\/strong\u003e family.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The components of the \u003cstrong\u003eSTABILE NPS Fume Exhaust System\u003c\/strong\u003e were created to be used with pellet stoves and pellet boilers, which expel fumes at high temperatures up to 300° C. if installed without gasket, or up to 200° C. when installed with gasket .\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The elements of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series are made of highly resistant \u003cstrong\u003eAISI 316L stainless steel\u003c\/strong\u003e , with a thickness of 0.4 mm; the black powder coating is carried out according to the highest quality standards to last a long time.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They enjoy the best Classes of temperature, pressure, resistance to condensation, resistance to corrosion, resistance to soot fire.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e They are complete with gaskets made of a black silicone elastomer, already assembled; the gaskets are profiled with three lips and are EN 14241-1 certified.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products of the \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e series have obtained the CE Certificate for the control of production systems in the factory (n° 0407-CPR-1478) pursuant to EU Regulation 305\/2011; comply with EN 1856-2:2009 | 0407 | Istituto Giordano SpA specific for metal chimneys (internal ducts and metal smoke ducts); have obtained the CE Marking Declaration of Performance no. 54 - DoP - 01.07.2013.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The \u003cstrong\u003eSTABILE NPS\u003c\/strong\u003e system is installed as a smoke duct and complies with UNI 10683 and UNI 11278 standards.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e The products are covered by RC stipulated with Zurich nr. 920b3680.\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e \u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e Diameter: Ø80mm. \u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e\u003cp style=\"\u0026amp;nbsptext-align:\" justify\u003e\u003c\/p\u003e","brand":"Stabile","offers":[{"title":"Default Title","offer_id":50682869383506,"sku":"NPSTC 85 D80","price":27.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0535\/5110\/4164\/files\/62bb63dd5895eb0508374f090ea41dd4.jpg?v=1779475442"}],"url":"https:\/\/climamarket.com\/en-de\/collections\/biomass-stove-accessories.oembed?page=3","provider":"ClimaMarket Europe SLU","version":"1.0","type":"link"}