Calpeda IDROMAT 5-15 1.5 bar pressure control

Save 50%
CalpedaSKU: 17030190000 ID: 1932F2

Price:
Sale price€65,85 Regular price€131,20
code
17030190000
id
1932F2
precodice
CPP
short description

Presscontrol or pressure flow switch Calpeda Idromat 5-15 for the automatic control of electric pumps, equipped with a flow sensor and a pressure sensor connected to an electronic system. IDROMAT 5-15 - STARTING PRESSURE 1.5 bar - PUMP HEAD > 30 m - HIGHEST POINT OF THE SYSTEM < 15 m.

brand
Calpeda
category
Accessories
type
Pumps accessories
series
IDROMAT
Download technical specifications

Description

Calpeda IDROMAT 5-15 1.5 bar pressure control

IDROMAT 5-15 - STARTING PRESSURE 1.5 bar - PUMP HEAD > 30 m - HIGHEST POINT OF THE SYSTEM < 15 m.

 

The presscontrol or pressure flow switch for electric pumps is used to automatically manage the operation of the pump, maintaining a constant pressure in the system: it turns the pump on when it detects a request for water (e.g. opening a tap) and turns it off when the flow stops, also protecting the electric pump from dry running.

The Calpeda IDROMAT presscontrol is among the most performing and reliable of its kind! It is a device for controlling electric pumps equipped with a flow sensor and a pressure sensor connected to an electronic system . The IDROMAT electronic controller commands the automatic start and stop of the water pump when a tap or valve connected to the installation is opened or closed, respectively. Once the pump has started, it remains running as long as any connected tap remains open, transmitting the required flow rate to the network at constant pressure.

It is composed of:

- inlet and outlet ports of the same diameter (R1 male);

- built-in non-return valve;

- dry running protection system;

- 0-12 bar pressure gauge as standard;

- automatic reset function to restore operation without manual intervention;

- Power LED (POWER);

- Pump operation LED (ON);

- Safety system intervention LED (FAILURE).

The three LEDs provide information on the system's operation, while the Reset button allows you to manually restart the system in the event of an alarm. The display allows you to set and adjust the system's restart pressure.

 

APPLICATIONS OF THE IDROMAT PRESSURE FLOW SWITCH

The Idromat pressure flow switch is used to ensure automatic control of the water supply and pressure increase and controls the pump start when the taps are opened and stop when they are closed.

Furthermore, it also provides protection against dry running, closed-mouth operation and operation with a lack of water in the suction area (due to a lack of water in the inlet pipe under head, due to a non-immersed suction pipe or excessive suction height, due to air entering the suction area).

The Calpeda IDROMAT presscontrol can be used with both potable and non-potable water circuits , however, in the case of installations where both types of water can be used, it is necessary to ensure that the two circuits never come into contact.

Installation must be performed by qualified technical personnel. Additional details, including installation, are contained in the user manual supplied with the product.

NB: for further technical specifications and dimensions, please refer to the attached technical sheet.

 

TECHNICAL FEATURES

- Power supply voltage: single phase 115 - 240 V ±5%

- Frequency 50-60 Hz

- 8A max in operation (16A max in start-up)

- Maximum pump power 1.5 kW

- IP65 protection index

- Max. operating pressure 12 bar (1.2 MPa)

- Max operating temperature 65°C

- Minimum flow ~ 1 l/min

- 1” male connections

 

WARRANTY

The guarantee is the official Calpeda one and lasts 2 years.

labels
wifi
code
kit
17030190000
kit features
brand
Calpeda
category
Accessories
type
Pumps accessories
series
IDROMAT
Download technical specifications

You may also like

Save 50%
Calpeda IDROMAT 5-22 2.2 bar pressure control
Calpeda Calpeda IDROMAT 5-22 2.2 bar pressure control
Sale price€65,85 Regular price€131,20
Save 41% BEST OFFERS -5%
Calpeda E-MXPM 404-PCD single-phase 1 HP/0.75 kW pressurization unit
Save 57%
Lowara Xylem genyo 16a/r15-30 pressure switch with cable
Lowara Lowara Xylem genyo 16a/r15-30 pressure switch with cable
Sale price€106,62 Regular price€247,66
Save 67%
Lowara Xylem genyo 8a/f15 pressure switch with cable
Lowara Lowara Xylem genyo 8a/f15 pressure switch with cable
Sale price€82,47 Regular price€247,66
Save 41% BEST OFFERS -5%
Calpeda E-MXPM 205-PCD single-phase pressurization group 1 HP/0.75 kW
Save 48%
Lowara Xylem genyo 16a/r15-30 pressure switch
Lowara Lowara Xylem genyo 16a/r15-30 pressure switch
Sale price€107,00 Regular price€207,40
Save 66%
Lowara Xylem genyo 8a/f15 pressure switch
Lowara Lowara Xylem genyo 8a/f15 pressure switch
Sale price€70,00 Regular price€207,40
Save 49% BEST OFFERS -5%
Calpeda GQSM 50-15 Submersible Sewage Pump 2 HP/1.5 kW
Calpeda Calpeda GQSM 50-15 Submersible Sewage Pump 2 HP/1.5 kW
Sale price€431,09 Regular price€841,43
Save 67%
Lowara Xylem genyo 8a/f22 pressure switch with cable
Lowara Lowara Xylem genyo 8a/f22 pressure switch with cable
Sale price€82,47 Regular price€247,66
Save 48% BEST OFFERS -5%
Calpeda MGPM 405 single-phase multi-impeller pump 1.5 HP/1.1 kW