Calpeda NGLM 2/80/A self-priming pump with ejector 0.75 HP/0.55 kW

Save 41%
CalpedaSKU: 70B51022000 ID: CA3CC8

Price:
Sale price€154,83 Regular price€262,91
code
70B51022000
id
CA3CC8
precodice
CPP
short description

Calpeda NGLM 2/80/A self-priming pump with ejector 0.75 HP/0.55 kW. Compact dimensions, with cast iron pump body and single-phase power supply, equipped with a two-pole induction motor, EI2 efficiency class, and characterized by the exclusive diffuser and flow control device, for a much faster, more powerful and self-priming product. Ideal for satisfying multiple needs, including pressurization, water supply with suction from wells, suction of irregular flows or in which there is the presence of air or gas, food use, irrigation and gardening.

brand
Calpeda
category
Electric pumps
type
Self-priming
series
NGL
width height depth
161X192X391
kw
0.55
power
Single phase
Download technical specifications

Description

Calpeda NGLM 2/80/A self-priming pump with ejector 0.75 HP/0.55 kW

Power 0.55 kW - Head 19.1/43 m - Flow rate 3.2/0.3 m3/h

 

The Calpeda NGLM 2/80/A self-priming pump is a monobloc electric pump with a built-in ejector, which exponentially and clearly increases its suction capacity, with unparalleled performances for a product of the same type.

Cast iron pump body and quality components, this electric pump is characterized by some truly peculiar technical details, which confer advantages in terms of results, reliability and safety. There are several pluses for which this pump can be considered one of the best on the market: innovation and technicality , in fact it includes an exclusive diffuser and flow control device (patented) as standard and given the cutting edge that characterizes the construction execution it stands out also for its ability to function in the event of temporary anomalies and for the silence which is given by the ability to manage the flow and effectively use the surrounding liquid to reduce noise; the dimensions: the particular compactness, greater than pumps of the same type, certainly makes it more versatile in installation and easily replaceable; stability is guaranteed by the rapid evacuation of the air which makes it safer against the risk of failure of the mechanical seal due to lack of lubrication and cooling; and finally worthy of mention is the optimized self-priming : the NGLs are fast and high-performance, in fact they manage to lift water from a depth of 9 m in less than 3.5 minutes, this opens up new scenarios for what concerns the multiplicity of uses with different heights, taking into account different factors and different needs.

As regards the general technical characteristics, the Calpeda NGLM 2/80/A self-priming pump is equipped with a 2-pole induction motor , 50 Hz, efficiency class IE2 ; single-phase power supply 230 V ± 10%, with thermoprotector and capacitor inserted in the terminal box; class F insulation and IP 54 protection. Some precautions are then fundamental in order to guarantee correct use of the pump: liquid temperature from 0 °C to +35 °C, ambient temperature up to 40 °C and maximum pressure allowed in the pump body of 8 bar, designed to provide continuous service.

Designed for various uses , such as: for the supply of water with suction from wells, for lifting water in which there may be the presence of air or other gaseous substances, for increasing the pressure of the water that arrives spontaneously under the head of the pump , to increase the pressure available from a distribution network (observe local regulations) and finally commonly for gardening and for washing with a water jet.

This self-priming monobloc electric pump must be installed with the rotor axis horizontal and support feet at the bottom. It is advisable to install the pump as close as possible to the suction source, providing adequate space for ventilation of the motor and for filling and emptying the pump. In any case, the installation must be carried out by expert technical personnel and before starting it is advisable to consult the instruction manual which contains the necessary information regarding the installation methods and other further specifications relating to the operating characteristics and programming.

 

DIMENSIONS

- Width 161 mm_Height 192 mm_Depth 391 mm

- Weight 12.1

 

WARRANTY

The guarantee is the official Calpeda one and lasts 2 years .

labels
wifi
false
code
kit
70B51022000
kit features
brand
Calpeda
category
Electric pumps
type
Self-priming
series
NGL
width height depth
161X192X391
kw
0.55
power
Single phase
Download technical specifications

You may also like

Save 44%
Calpeda NGLM 3/100 self-priming pump with ejector 0.9 HP/0.65 kW
Save 44%
Calpeda NGLM 4/110 self-priming pump with ejector 1 HP/0.75 kW
Save 42%
Calpeda CAM 80E self-priming liquid ring pump 0.6 HP/0.45 kW
Calpeda Calpeda CAM 80E self-priming liquid ring pump 0.6 HP/0.45 kW
Sale price€208,42 Regular price€357,21
Save 44% BEST OFFERS -5%
Calpeda Meta self-priming multi-impeller single-phase INVERTER pump 1.8 HP/1.35 kW
Save 48% BEST OFFERS -5%
Calpeda MGPM 405 single-phase multi-impeller pump 1.5 HP/1.1 kW
Save 45%
Calpeda MGPM 205 single-phase multi-impeller pump 1 HP/0.75 kW
Save 44% BEST OFFERS -5%
Calpeda Meta Small self-priming multi-impeller single-phase INVERTER pump 0.87 HP/0.65 kW
Save 41% BEST OFFERS -5%
Calpeda E-MXPM 205-PCD single-phase pressurization group 1 HP/0.75 kW
Save 49% BEST OFFERS -5%
Calpeda GQSM 50-15 Submersible Sewage Pump 2 HP/1.5 kW
Calpeda Calpeda GQSM 50-15 Submersible Sewage Pump 2 HP/1.5 kW
Sale price€431,09 Regular price€841,43
Save 41% BEST OFFERS -5%
Calpeda E-MXPM 404-PCD single-phase 1 HP/0.75 kW pressurization unit