DAB DP 151 M IE2 single-phase self-priming centrifugal pump 1.5 HP/1.1 kW
Nominal power 1.1 kW/1.5 HP - Flow rate range 300 – 2800 l/h - Self-priming for suction up to 21 m with the use of the E 25 ejector (to be purchased separately) - 1" delivery
The DP are DAB 's self-priming centrifugal pumps ideal for deep suction and water supply to residential buildings and small agriculture. They have a high suction power that reaches a depth of 21 meters if combined with the E 25 ejector (to be purchased separately with code 109200020 ).
In the creation of the DP pumps, DAB uses the best materials to ensure resistance and long life: in the model proposed here, the 151 M single-phase , the pump body and motor support are made of cast iron, the impellers and the diffuser are made of technopolymer for high Abrasion resistance; the rotor and shim rings are made of stainless steel, the mechanical seal is made of carbon and ceramic. This model is equipped with a double impeller for greater suction power.
The asynchronous motor is closed and cooled by ventilation from the outside. Electrical overheating protection and capacitor are standard equipment. The rotor is very silent because it is mounted on oversized, greased-for-life ball bearings.
It has an IP 44 protection rating against any solid foreign body and water jets which guarantees great durability over time.
The model presented here is DAB DP 151 M with IE 2 engine as per EU 2019/1781 - EU 2021/341 regulation, high efficiency and energy saving.
APPLICATIONS
The DP DAB self-priming electric pumps are ideal for use in residential water systems where deeper suction is required. Furthermore, they can be used for small-scale agriculture in the light industrial sector where the liquid to be pumped is quite clean and with a density close to water.
The DP are self-priming up to 21 meters with the use of the E 25 ejector.
GUARANTEED SAVINGS AND HIGH COMFORT
DP self-priming centrifugal pumps have high performance in terms of head and flow rate ; The model proposed here has a nominal power of 1.1 kW (or 1.5 HP), a flow rate range from 300 to 2800 l/h and reaches extractions of up to 21 meters with the use of the E 25 ejector.
The DPs are not very noisy and this model can work with a maximum operating pressure of 8 bar; the temperature of the pumped liquid can vary between 0 and 35°C for domestic use while for other types of uses it can reach 40°C.
Savings are guaranteed: DAB makes these pumps with excellent quality materials which allow them to last exceptionally over time.
LARGE MODULARITY OF INSTALLATION AND USE
The DP electric pump it must be installed in a fixed horizontal position. It takes up little space and is very simple to start.
ATTENTION! In order for the pump to work correctly and its mechanical parts not to be compromised, before starting it must be primed correctly by filling it with clean water through the appropriate hole.
DIMENSIONS
Length: 388 mm – Width: 210 mm – Height: 155 mm – Delivery: 1”
Weight: 28kg.
WARRANTY
The warranty is the Official DAB Water Technology one and lasts 24 months .
