Bosch Condens 2300 W methane/LPG condensing boiler with chronothermostat, valves and fittings.
Specific domestic hot water flow rate: l/min. 12.2
24 kW – Ideal for heating up to 150 m2 with an average height of about 2.7 m
Dimensions: Height: mm. 713 – Depth: mm. 300 – Width mm. 400
Simply easy to install, the Bosch Condens condensing boiler is designed to find space anywhere: its small size makes it easy to install in any domestic environment and makes it an ideal solution for modernization projects. Installing the Bosch Condens boiler, even in the event of renovation, is very simple: its compactness makes it extremely versatile and, as it adapts to multiple geometries, it does not require moving the smoke outlet. Maintenance is also simplified, thanks to the possibility of removing the side panels and easily accessing the components. Modern and functional, both inside and out, the Condens boiler combines the use of top quality materials, designed to last over time, with a sophisticated and functional design, which makes the modernity of this boiler evident both in front of and behind the casing.
Guaranteed savings and high comfort
The components are top quality, starting with the silicon aluminum heat exchanger, a guarantee of sturdiness and reliability over time. Simply efficient in all circumstances Bosch Condens is synonymous with efficiency thanks to the modulating burner with a 1:10 range which automatically adapts to the heat requirement of the moment, achieving very high seasonal energy efficiency for room heating, with values up to at 94%. Again thanks to the wide modulation, this boiler also supplies a lot of hot water with a constant temperature. Furthermore, Condens 2300 W, if combined with modulating thermoregulation with climatic function, falls within energy class A+ and allows access to tax incentives of up to 65%.
Advantages:
- Simplified installation and maintenance operations
- High efficiency guaranteed by the wide modulation range (1:10)
- Small size: it adapts to any domestic environment and represents the ideal solution for replacement interventions
- Optimal insulation to guarantee extremely silent operation
- Accessible and intuitive electronics
- New rounded design and intuitive controls
- 3-star sanitary comfort, the maximum obtainable according to the EN13203-1/2 standard
BOSCH CR100 advanced modulating chronothermostat weekly BUS EMS 2
The BOSCH CR100 modulating chronothermostat is an advanced chronothermostat which allows remote control of compatible boilers via BUS EMS 2 communication protocol. Combined with the latest generation condensing boilers, it allows you to reach Energy Class A+ and access the Ecobonus 65% tax deductions as the chronothermostat is in Class V according to the ErP Regulation. The BOSCH CR100 modulating chronothermostat can be used to regulate a mixed or direct heating circuit, a circuit for a boiler for the production of domestic hot water via a heat generator and for the production of domestic hot water via a solar circuit.
It is weekly programmable and aesthetically looks like a small object with a modern and essential design: square and compact, the front panel has a beautiful glossy white glass with rounded corners; it is equipped with 4 function keys , a backlit LCD display in the center and a practical turn and press knob to navigate through the menus and make the desired choices respectively. The installation is done on the wall.
TECHNICAL FEATURES
- Rated voltage 10 - 24V DC
- Rated current 6mA
- EMS 2 BUS interface (2-wire BUS)
- Setting range 5 - 30 °C
- Permissible ambient temperature 0 - 50 °C
- Autonomy 4 hours
- Protection class III
- Degree of protection IP20
- 6 daily switching points
- Holiday program and automatic summer/winter switching
- Integrated sensor to ensure the desired room temperature and manage the individual direct or mixed heating zone, DHW production and the solar circuit for DHW production
- Automatically adapts consumption to the real needs of the building, thanks to continuous modulation, displays energy consumption, maintenance intervals and error codes
- It can be used as a remote control of the boiler or of the CW400 regulation, or as a zone control combined with the MZ100 module. Can be combined with the T1 RF wireless external probe
- Configuration and automatic identification of all modules connected to the EMS BUS (compatible with MM100, MZ100 and MS100)
- Communicates with the boiler/system via EMS BUS, can be combined with boilers equipped with Bosch Heatronic 3® or 4®
- Advanced thermoregulation that can be combined with a class A condensing boiler.
DIMENSIONS
Width: 95mm - Height: 95mm - Depth: 33mm
Weight: 0.15kg.
WARRANTY
The warranty is the official BOSCH one and has a duration of 2 years .
Angled thermostatic kit complete with 3/8 IVAR connections for radiators
Composed of:
- T1500 Series thermostatic head for thermostatic and thermostatizable valves on heating radiators
The T1500 Series thermostatic head with built-in liquid sensor is used in combination with IVAR radiator valves.
Its pleasant design with clean lines allows it to integrate perfectly to complete any model of heating radiator and in any environment.
It is mounted on the radiator water delivery management valve and replaces the water inlet adjustment knob; it is equipped with a liquid sensitive element of particular sensitivity which makes it extremely precise and reliable.
The T1500 Series thermostatic head transforms the water flow adjustment knob of the radiator into a real object for room temperature control . It is equipped with a graduated scale that indicates the COLD position (corresponding to 6.5 °C) and a further five intermediate and partial adjustment positions, each of which corresponds to a temperature that reaches up to 28 °C. It will therefore always be possible to easily set the desired temperature in the room where the radiator is installed. Contrary to the classic radiator valves, which simply allow you to adjust the water inlet flow, the thermostatic head allows you to choose the desired temperature in the room so that, by continuously detecting the room temperature, it automatically adjusts the flow of circulating water in the radiator and keeps the temperature always constant . The advantages can be found in the considerable comfort it offers as by mounting them on all the radiators it is possible to set the same temperature in all the rooms and no longer feel temperature differences between one room and another or it is possible to deliberately set different temperatures in the rooms and keep them that way. There is also immediate energy saving which involves the use of the thermostatic valve which, by automatically regulating the flow of water in the radiator, avoids useless waste of energy due to the usual bad adjustments of the manual valves. The control is complete with a temperature limiting device and a set temperature blocking device .
It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C.
The knob is a compound of PC and ABS in white RAL 9003, the ring nut is in nickel-plated brass, the cartridge and the control rod are in POM, the thermostat is liquid expansion.
Installation is quick and easy; the dimensions are very small.
DIMENSIONS: Length: mm 77 – Diameter: mm 38 - Fitting: M30 x 1.5
IVAR thermostatic angle valve with 3/8 connections for radiators
The IVAR 3/8 angle valve with thermostatic option is mounted on heating radiators and has the function of managing the incoming flow of the system carrier liquid.
It has a pleasant and discreet design that integrates well with all radiator models and in any environment.
The IVAR 3/8 angle valve with thermostatic option expresses the particular care that IVAR dedicates to both the design and construction of the articles.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the valve body allow it to be installed on all radiator models.
The valve body is in chromed brass, the obturator control stem is in stainless steel for a particular efficiency and durability over time, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete of a rubber ring that allows it to be fixed without using additional gaskets or hydraulic hemp.
It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
IVAR angle lockshield with 3/8 connections for radiators
The 3/8 IVAR angle lockshield is mounted on heating radiators and has the function of managing the outflow of the system carrier liquid and achieving perfect balance of the radiator in the heating system.
It has a pleasant and discreet design that integrates well with all radiator models and in any environment.
The IVAR 3/8 angle lockshield expresses the particular care that IVAR dedicates to both the design and construction of the items.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the body allow it to be installed on all radiator models.
The lockshield body is in chromed brass, the internal components are in stainless steel for a particular efficiency and durability over time, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete with a rubber ring which allows it to be fixed without using additional gaskets or hydraulic hemp, the cap is in white RAL 9003 ABS.
It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
TR 4430 Fitting for IVAR copper pipe with 12X1 connections for valves and lockshields
The IVAR copper pipe fitting is used to make the connection between the IVAR valve or lockshield valve and the 12X1 size copper pipe that feeds the heating radiators.
The IVAR copper pipe fitting is made with particular constructional care. The body is made of brass for greater efficiency and durability, the hydraulic seals already incorporated are made of EPDM, the hose ring is made of brass.
It can be used with a carrier fluid temperature range from 0 to 95°C and max operating pressure: 10 bar.
Installation is also quick because it does not require additional elements such as gaskets or hydraulic hemp; the dimensions are very small.
WARRANTY
The guarantee is the official IVAR one and has a duration of 2 years.
