Condensing boiler Beretta Mynute X 25C p CSI 19 kW natural gas convertible to LPG and propane air - 14.3 l/min. - A+ - Ecobonus Kit 65%
The Kit consists of:
- Beretta Mynute X 25C p CSI 19 kW natural gas boiler convertible to LPG and propane air - cod. 20163564
- Beretta Hi Comfort T100 advanced chronothermostat - cod. 20193352
- 6 x Angled thermostatic kit complete with 3/8 IVAR connections for radiators - cod. 520188SBRC
- 12 x TR 4430 Fitting for IVAR copper pipe with 12X1 connections for valves and lockshields - cod. 500157
THE BOILER
Sealed chamber natural gas boiler convertible to LPG and propane air - 14.3 l/min.
19 kW – Ideal for heating up to 120 m2 with an average height of 2.7 m
Code 20163564
Delicate and elegant but with a sturdy steel heart inside: Beretta Mynute X is the combined condensing boiler (for heating and domestic hot water production ) with truly innovative features and among the most versatile on the market. The leading feature of this product is undoubtedly its stainless steel condensing exchanger which offers unparalleled performance, up to 92% ErP average efficiency : it consists of a single coil wrapped in AISI 304 L stainless steel with a large section which it guarantees greater efficiency and longer-lasting cleaning thanks to its highly resistant material to the corrosion typical of the acid condensate of condensing boilers. The flow rate remains constant and clogging phenomena are limited thanks to the geometry of the exchanger; it also has an innovative structure because it is of the frontal type and its guide system allows very rapid disassembly and reassembly for maintenance operations. Durability and resistance to corrosion combined with the ease of access of this component are completely new features that are difficult to find in other boilers of this type.
The Mynute X 25C p is designed for both indoor and outdoor and recessed installation: thanks to its IPX5D degree of protection (protection from water jets and dust) and resistance up to temperatures of -15° C (with the antifreeze heater kit that can be purchased separately) this boiler can easily adapt to different installation requirements and integrate into new building and redevelopment projects (thanks to the standard Clapet valve and the C10 approval for ducting in collective flues in pressure even with a diameter of 50 mm), single installation or even in hybrid applications in multi-energy systems .
The high-efficiency modulating circulation pump (EEI ≤ 0.2) makes it possible to significantly improve performance and have lower electrical consumption as well as higher durability of the components. The Mynute X differs from other condensing boilers for its greater efficiency for the same fuel used. In fact, the modulation field of this line of boilers reaches up to 1:8 of the minimum power that can be supplied, i.e. of the maximum nominal power. When the environment is heated, the boiler is able to reduce the flame up to an eighth of the maximum to keep the temperature constant, in this way not only does it not go out but it guarantees greater efficiency and silence , decreases thermal shocks and electricity consumption . It is therefore possible to avoid continuous switching on and off and also keep expenses under control.
The Mynute X features a new generation digital interface : behind the flap on the front that reveals the green gem, the LED that indicates correct operation, there is a modern and intuitive control panel with remarkable ease of use, a display Backlit LCD with icons and scrolling texts and seven surrounding function keys allow the user/installer to access all boiler settings and parameters. From the display it is also possible to program boiler switching on and off on a weekly basis and to activate or deactivate the pre-heating function on the DHW circuit, useful for reducing waiting times for the DHW. The boiler is also designed for combination with the new advanced chronothermostats (also wifi, which can be purchased separately) which make it manageable wherever you are simply using a smartphone or tablet.
As far as emissions into the atmosphere are concerned, the Mynute X burner is premixed and reaches the NOx6 level, allowing the levels of burnt gases to be kept low at all times.
The Mynute X is a HYBRID READY boiler: thanks to its predispositions it is in fact compatible with the HYBRID CONNECTs for the management of two-zone systems and can also be installed in hybrid systems where heat pumps, solar thermal and/or coexist. or photovoltaic, making it possible to reduce final consumption with an eye always attentive to respect for the environment.
The boiler is standard with methane operation but can be converted to LPG operation or, for this size, to propane gas by requesting the conversion to the Beretta CAT during the first ignition phase.
The boiler has the exhaust connection flange already installed as standard, the flue outlets, specific for the Mynute X , are quick-connect because there is no need for an external collar, furthermore the double T assembly template is included in the boiler kit making installation operations really simple and fast.
GUARANTEED SAVINGS AND HIGH COMFORT
Thanks to its innovative technological characteristics, the Mynute X fits admirably into the family of Beretta boilers attentive to the management of consumption combined with high efficiency and low emissions and therefore, overall, with respect for the environment, reaching an A+ energy class if combined to a latest generation advanced control.
DIMENSIONS
Height: 740mm - Depth: 275mm - Width: 420mm
Weight: 35kg.
WARRANTY
The guarantee is the official Beretta one and has a duration of 2 years .
Beretta Hi Comfort T100 advanced chronothermostat
The Hi, Comfort T100 chronothermostat is a room control for boilers designed by Beretta for the replacement of old thermostats but also for new single and multi-zone installations. Also combined with the Hi wi-fi module, Comfort G100-W (optional) can connect to the internet for complete remote management of the most modern Beretta boilers.
In Class V according to the ErP directive, the Hi, Comfort T100 control, combined with the latest generation Beretta condensing boilers, allows you to reach Energy Class A+ and access the 65% tax deductions.
The design of Hi, Comfort T100 is modern and elegant: compact, rounded corners and a silver frame enclose the backlit display and the arrow and function keys that offer simple and intuitive menu navigation.
TECHNICAL FEATURES
- Modulating chronothermostat function for climatic and ambient management (0.5°C band) of Beretta boilers
- Universal ON/OFF chronothermostat function for room regulation of almost all boilers on the market
- Possibility of managing up to 8 independent unmixed zones
- Room temperature adjustment from + 3°C to + 35°C in 0.2°C increments
- Weekly time programming in 30 minute intervals
- Home temperature reading
- Alarm reading and unlocking of Beretta boilers
- Operating modes: Auto, Manual, Holiday, Party, Summer (with OTBus), Off.
- Three modifiable temperature levels: Comfort, Economy, Antifreeze
- Low battery status indicator
- Supplied with: 1.5V TYPE AA batteries, magnetic bi-adhesive, plugs and screws, base with terminal block.
DIMENSIONS
Width: 135mm - Height: 89mm - Depth: 28mm.
WARRANTY
The guarantee is the official Beretta one and has a duration of 2 years .
Angled thermostatic kit complete with 3/8 IVAR connections for radiators
Composed of:
- T1500 Series thermostatic head for thermostatic and thermostatizable valves on heating radiators
The T1500 Series thermostatic head with built-in liquid sensor is used in combination with IVAR radiator valves.
Its pleasant design with clean lines allows it to integrate perfectly to complete any model of heating radiator and in any environment.
It is mounted on the radiator water delivery management valve and replaces the water inlet adjustment knob; it is equipped with a liquid sensitive element of particular sensitivity which makes it extremely precise and reliable.
The T1500 Series thermostatic head transforms the water flow adjustment knob of the radiator into a real object for room temperature control . It is equipped with a graduated scale that indicates the COLD position (corresponding to 6.5 °C) and a further five intermediate and partial adjustment positions, each of which corresponds to a temperature that reaches up to 28 °C. It will therefore always be possible to easily set the desired temperature in the room where the radiator is installed. Contrary to the classic radiator valves, which simply allow you to adjust the water inlet flow, the thermostatic head allows you to choose the desired temperature in the room so that, by continuously detecting the room temperature, it automatically adjusts the flow of circulating water in the radiator and keeps the temperature always constant . The advantages can be found in the considerable comfort it offers as by mounting them on all the radiators it is possible to set the same temperature in all the rooms and no longer feel temperature differences between one room and another or it is possible to deliberately set different temperatures in the rooms and keep them that way. There is also immediate energy saving which involves the use of the thermostatic valve which, by automatically regulating the flow of water in the radiator, avoids useless waste of energy due to the usual bad adjustments of the manual valves. The control is complete with a temperature limiting device and a set temperature blocking device .
It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C.
The knob is a compound of PC and ABS in white RAL 9003, the ring nut is in nickel-plated brass, the cartridge and the control rod are in POM, the thermostat is liquid expansion.
Installation is quick and easy; the dimensions are very small.
DIMENSIONS
Length: 77 mm - Diameter: 38 mm - Connection: M30 x 1.5
- IVAR thermostatic angle valve with 3/8 connections for radiators
The IVAR 3/8 angle valve with thermostatic option is mounted on heating radiators and has the function of managing the incoming flow of the system carrier liquid.
It has a pleasant and discreet design that integrates well with all radiator models and in any environment.
The IVAR 3/8 angle valve with thermostatic option expresses the particular care that IVAR dedicates to both the design and construction of the articles.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the valve body allow it to be installed on all radiator models.
The valve body is in chromed brass, the obturator control stem is in stainless steel for a particular efficiency and durability over time, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete of a rubber ring that allows it to be fixed without using additional gaskets or hydraulic hemp.
It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
- IVAR angle lockshield with 3/8 connections for radiators
The 3/8 IVAR angle lockshield is mounted on heating radiators and has the function of managing the outflow of the system carrier liquid and achieving perfect balance of the radiator in the heating system.
It has a pleasant and discreet design that integrates well with all radiator models and in any environment.
The IVAR 3/8 angle lockshield expresses the particular care that IVAR dedicates to both the design and construction of the items.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the body allow it to be installed on all radiator models.
The lockshield body is in chromed brass, the internal components are in stainless steel for a particular efficiency and durability over time, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete with a rubber ring which allows it to be fixed without using additional gaskets or hydraulic hemp, the cap is in white RAL 9003 ABS.
It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
TR 4430 Fitting for IVAR copper pipe with 12X1 connections for valves and lockshields
The IVAR copper pipe fitting is used to make the connection between the IVAR valve or lockshield valve and the 12X1 size copper pipe that feeds the heating radiators.
The IVAR copper pipe fitting is made with particular constructional care. The body is made of brass for greater efficiency and durability, the hydraulic seals already incorporated are made of EPDM, the hose ring is made of brass.
It can be used with a carrier fluid temperature range from 0 to 95°C and max operating pressure: 10 bar.
Installation is also quick because it does not require additional elements such as gaskets or hydraulic hemp; the dimensions are very small.
WARRANTY
The guarantee is the official IVAR one and has a duration of 2 years .
Credit assignment and invoice discount
LAW DECREE 17/07/2020 N. 77 ART.119-121
It is possible to take advantage of the tax deduction of 50% and 65% directly with the discount in the breach through the transfer of credit, without having to wait for the Irpef deduction in 10 years. The incentives concern energy efficiency works relating to the partial or complete replacement of winter air conditioning systems with systems equipped with a boiler, heat pump or equipped with hybrid appliances assembled in the factory and expressly designed to work in combination with each other. In particular, the deduction includes:
- 50%: BIOMASS BOILERS and CLASS A CONDENSING BOILERS;
- 65%: CLASS A+ CONDENSING BOILERS Advanced thermoregulation system; CONDENSING HOT AIR GENERATORS, HEAT PUMPS, PDC WATER HEATERS, SOLAR COLLECTORS, HYBRID GENERATORS.
Residents and non-residents, holders of any type of income and not only the owners of the properties but also the holders of real rights of enjoyment on the properties subject to the interventions who support the expenses are eligible for the deduction. The facilitation is allowed for interventions on existing buildings registered in the land registry or for which the land registry has been requested, and on real estate units of any cadastral category. Interventions that are carried out during the construction phase of the building are excluded.
The subjects entitled to the deductions due for the energy requalification interventions referred to in article 14 of the decree-law of 4 June 2013, n. 63 (which includes among others the replacement of winter air conditioning systems with hybrid systems), can opt, instead of the direct use of the same, for a contribution equal to the amount of the deduction due, in the form of a discount on the amount due, anticipated by the supplier who carried out the interventions.
