Condensing boiler Ferroli Bluehelix HiTech RRT 28 C 24 kW

The Kit consists of :

- Boiler Ferroli Bluehelix Hitech RRT 28 C - cod. 0T4B4AWA

- Ferroli Cronorem modulating chronothermostat - cod. 013114XA

- Ferroli external probe for external temperature detection - cod. 013018X0

- 6 x Complete angle thermostatic kit 3/8 IVAR connections for radiators - cod. 520188SBRC

- 12 x TR 4430 Fitting for IVAR copper pipe with 12X1 connections for valves and lockshields - cod. 500157

THE BOILER

Sealed chamber boiler running on natural gas, LPG or propane air - 16 l / min.

24 kW - Ideal for heating up to 150 m2 with an average height of 2.7 m

Ferroli called it Hitech and the Bluehelix HiTech RRT condensing boiler is so from all points of view! From the innovative control panel with capsense technology it is possible to set and monitor the operating parameters in a simple and intuitive way; the interface is a nice 2.8 touch screen display. The technological heart of the boiler is the Thermobalance Thermal Group by Ferroli which contains within it the single-circuit steel exchanger with increased cross-section, for greater resistance to encrustations and ease of cleaning, the hemispherical steel burner with long life gasket, the door of the air-cooled burner, the offset fan that facilitates maintenance operations, the Multi Combustion Control MC² system with gas-adaptive technology that constantly controls and stabilizes combustion as the gas and air conditions change. This new control electronics allows to reach modulation ranges up to 1: 9 on this size allowing the boiler to adapt to the actual power required by the system with consequent reduction of operating costs and extension of the useful life of the product.

The BLUEHELIX HiTech RRT is MGR ( Methane Gpl Ready ): that is, it is designed for operation with both methane, LPG, and propane air through a simple initial configuration and without the need for different nozzle kits. The boiler is also equipped with a plug-in system for innovative operation with more eco-sustainable gas and hydrogen mixtures.

For domestic hot water, the exchanger is dedicated for greater efficiency and duration over time.

The Ferroli Bluehelix HiTech RRT condensing boiler is ideal for replacements because it can be ducted into collective flues under pressure thanks to the Fume Protection System with standard clapet valve; it is also possible to intubate it in old drains with a diameter of 50 mm.

Proposed here in the 24 kW size, the Bluehelix HiTech RRT 28 C condensing boiler by Ferroli can meet the heating and domestic hot water production needs of homes up to 150 square meters.

The Ferroli BLUEHELIX HiTech RRT condensing boiler boasts a 94% efficiency in space heating and energy class A; by combining the boiler with a modulating remote control such as the Romeo N and the Ferroli external probe, these values reach the top of the category ( 98% and class A + ), allowing access to all tax deductions and incentives for energy efficiency. in force today.

The savings are realized again thanks to the ECO operating mode which allows a reduction in consumption in periods of non-use of the boiler. In COMFORT operation, thanks to the temperature maintenance system of the heat exchanger, domestic hot water is delivered more quickly and comfortably.

Thanks to the Sun Easy function, the boiler is already prepared for the connection of solar systems for the production of domestic hot water. The Stop and Go system allows you to delay the ignition of the burner by activating it only if the domestic hot water is drawn.

The boiler is designed to limit and facilitate maintenance and cleaning operations: the casing with removable side panels is made up of only three pieces; all components are easily accessible and removable without disassembling the surrounding ones. The elegant coat reaches under the hydraulic couplings for a more elegant and clean design.

The Bluehelix HiTech RRT is also super silent, giving optimal comfort also from an acoustic point of view.

It can also be installed outdoors in a partially protected place with temperatures down to -5 ° C; with the appropriate optional antifreeze kit, it can reach -15 ° C.

DIMENSIONS

Width: 420 mm - Height: 700 mm - Depth: 320 mm

Weight: 28 kg.

Functionality:

• Connection via OpenTherm bus with the boiler
• Setting of the heating and domestic hot water delivery temperature and display of anomalies
• Holiday function: switching off the heating / domestic hot water for a minimum of 10 minutes to a maximum of 45 days
• Weekly heating programming with 4 distinct daily time bands
• Sliding temperature operation with external climatic compensation through the use of the external probe (optional) to be connected to the boiler
• Sliding temperature operation with ambient climatic compensation , variation of the delivery temperature as a function of the ambient temperature
• System filling : the system filling device can be activated automatically / manually (only in conjunction with MAXIMA )
• Advanced modulating thermoregulation (Class V according to ErP directive, Class VI if the external probe is connected to the boiler)
• A + SYSTEM : Cronorem combined with a Ferroli boiler with seasonal efficiency ηs 94%, constitutes a heating system with A + labeling (scale from G to A +++)

Warranty

The guarantee is the official Ferroli guarantee and is valid for 24 months

The external probe for Ferroli boilers connects to the boiler to measure the external temperature and communicates it to the boiler control unit. Thanks to a series of algorithms, the boiler is therefore able to automatically calibrate the operating power and the temperature of the system based on the real climatic conditions and therefore on the real power needs to be used. This obviously involves a considerable saving of gas because the boiler will always work in the optimal conditions of use.

Combined with the ROMEO N or ROMEO N RF Modulating Remote Control, it allows the boiler to reach Energy Class A + .

The aesthetics of the article may vary according to the availability of the moment.

WARRANTY

The warranty is the official Ferroli one and has a duration of 24 months . For the boiler, the warranty can be extended up to 5 years with Formula 5 Years Without Thoughts (in the initial ignition phase via CAT Ferroli).

Composed of:

- Series T1500 thermostatic head for thermostatic and thermostatic valves on heating radiators

The T1500 Series thermostatic head with incorporated liquid sensor is used in conjunction with IVAR valves for radiators.

Its pleasant design with clean lines allows it to integrate perfectly to complement any model of heating radiator and in any environment.

It is mounted on the radiator water delivery management valve and replaces the water inlet adjustment knob; it is equipped with a sensitive liquid element of particular sensitivity which makes it extremely precise and reliable.

The T1500 Series thermostatic head transforms the radiator water delivery adjustment knob into a real object for controlling the room temperature . It is equipped with a graduated scale that indicates the COLD position (corresponding to 6.5 ° C) and a further five intermediate adjustment positions with partial, each of which corresponds to a temperature that reaches up to 28 ° C. It will therefore always be possible to easily set the desired temperature in the room where the radiator is installed. Contrary to the classic radiator valves, which simply allow you to adjust the water inlet flow, the thermostatic head allows you to choose the desired temperature in the room so that, by continuously detecting the room temperature, it automatically adjusts the flow of water that circulates. in the radiator and always keeps the temperature constant . The advantages can be found in the considerable comfort it offers as by mounting them on all radiators it is possible to set the same temperature in all rooms and no longer feel temperature differences between one room and another or you can deliberately set different temperatures in the rooms and keep them that way. There is also an immediate energy saving that involves the use of the thermostatic valve which, by automatically regulating the flow of water in the radiator, avoids unnecessary waste of energy due to the usual bad adjustments of manual valves. The control is complete with a temperature limitation device and a set temperature locking device .

It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C.

The knob is made of PC and ABS in white RAL 9003 color, the ring nut is in nickel-plated brass, the cartridge and the control rod are in POM, the thermostat is liquid expansion.

Installation is quick and easy; the dimensions are very small.

DIMENSIONS

Length: 77 mm - Diameter: 38 mm - Connection: M30 x 1.5

- IVAR angle valve with thermostatic option with 3/8 connections for radiators

The 3/8 IVAR angle valve with thermostatic option is mounted on the heating radiators and has the function of managing the incoming flow of the system's vector liquid.

It has a pleasant and discreet design that integrates well with all radiator models and in any environment.

The 3/8 IVAR angle valve with thermostatic option expresses the particular care that IVAR dedicates to both the design and construction of the items.

The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the valve body allow it to be installed on all radiator models.

The valve body is in chromed brass, the shutter control rod is in stainless steel for particular efficiency and durability, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete a rubber ring that allows it to be fixed without using additional gaskets or hydraulic hemp.

It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C.

Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.

- IVAR angle lockshield with 3/8 connections for radiators

The IVAR 3/8 square lockshield is mounted on the heating radiators and has the function of managing the outflow of the system vector liquid and achieving a perfect balance of the radiator in the heating system.

It has a pleasant and discreet design that integrates well with all radiator models and in any environment.

The 3/8 IVAR team holder expresses the particular care that IVAR dedicates to both the design and construction of the items.

The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the body allow it to be installed on all radiator models.

The lockshield body is in chromed brass, the internal components are in stainless steel for a particular efficiency and durability, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete with a rubber ring which allows it to be fixed without using additional gaskets or hydraulic hemp, the cap is in white ABS RAL 9003.

It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C.

Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.

The IVAR copper pipe fitting is used to make the connection between the IVAR valve or holder and the 12X1 copper pipe that supplies the heating radiators.

The IVAR copper pipe fitting is made with particular constructive care. The body is made of brass for greater efficiency and durability, the hydraulic seals already incorporated are made of EPDM, the hose ring is made of brass.

It can be used with a carrier fluid temperature range from 0 to 95 ° C and max working pressure: 10 bar.

Installation is also quick because it does not require additional elements such as gaskets or hydraulic hemp; the dimensions are very small.

WARRANTY

The warranty is the official IVAR one and has a duration of 2 years.

LAW DECREE 17/07/2020 N. 77 ART. 119-121

Until 31/12/2021 it is possible to take advantage of the tax deduction of 50% and 65% directly with the discount in breach through the transfer of the credit, without having to wait for the Irpef deduction in 10 years. The incentives relate to energy efficiency works relating to the partial or complete replacement of winter air conditioning systems with systems equipped with a boiler, heat pump or equipped with hybrid appliances assembled in the factory and expressly designed to work in combination with each other. In particular, the deduction includes:

- 50%: BIOMASS BOILERS and CLASS A CONDENSING BOILERS;

- 65%: CLASS A CONDENSATION BOILERS + Advanced thermoregulation system; CONDENSATION HOT AIR GENERATORS; HEAT PUMPS; WATER HEATER WITH PDC; SOLARIL COLLECTORS; HYBRID GENERATORS.

Residents and non-residents, holders of any type of income and not only the owners of the properties but also the holders of real rights of enjoyment on the properties subject to the interventions that support the costs are admitted to the deduction. The concession is allowed for interventions on existing buildings registered in the land registry or for which registration has been requested, and on real estate units of any cadastral category. Interventions that are carried out during the construction of the property are excluded.

The subjects entitled to the deductions due for the energy requalification interventions referred to in article 14 of the decree-law of June 4, 2013, n.63 (which includes, among others, the replacement of winter air conditioning systems with hybrid systems), can opt , in place of the direct use of the same, for a contribution equal to the amount of the deduction due, in the form of a discount on the amount due, advanced by the supplier who carried out the interventions themselves.