Condensing boiler Immergas Victrix 35 TT condensing - 13.4 l / min.
FEEDING METHANE, LPG AND PROPANATE AIR - AUTOMATICALLY RECOGNIZES THE TYPE OF GAS
32 kW - Ideal for heating up to 220 square meters with an average height of about 2.7 m
THE BOILER
The Immergas VICTRIX TT is a wall-mounted condensing boiler with truly innovative technological features: it is characterized in fact by a condensing module in special alloy which makes it particularly resistant to corrosion ; its geometric characteristics also ensure high flow rates and heads as well as low clogging levels. Another innovative feature is the advanced electronic board which allows, among other things, to set the type of gas without changing the nozzles; the boiler can operate on natural gas , LPG or propane air simply by setting the appropriate parameters from the board during the first ignition phase. The high efficiency modulating circulator guarantees very low consumption by being able to operate at variable or fixed speed . The VICTRIX TT offers very high yields thanks to a modulation range ranging from 12 to 100%. In energy class A both as regards heating and the production of domestic hot water, and with levels of polluting emissions of class NOX5 , the VICTRIX TT is an "ecological" boiler capable of offering great energy savings and low emissions.
The VICTRIX TT has a simple and pleasant aesthetic, refined on the front panel with the beautiful vertical rib in relief that gives the line momentum and elegance, the corners of the coat are beveled at 45 degrees and the lower part houses the command and control area behind an elegant flap: comfortable knobs and buttons in relief for setting all functions and checking malfunctions, backlit LCD display and visible pressure gauge for easy pressure control. The control area cover can be dismantled to allow direct access to the electrical connection compartment.
All this in just 25 cm of depth that make the VICTRIX TT a versatile boiler, suitable for any type of installation and ideal for replacing old boilers even with ducting in collective flues. Designed to be installed indoors , it can also be placed outdoors in places partially protected from bad weather thanks to its IPX5D degree of protection and the standard antifreeze device (standard protection down to -5 ° C; up to -15 ° C with optional kit) but even in the open air with the special Immergas cover kit (optional). Finally, it can be installed in the specific Immergas “ Omni Container” (optional).
The boiler is designed to be combined with temperature controllers also with wireless operation and for the use of the Immergas DOMINUS app which allows complete remote control via smartphone or tablet.
VICTRIX TT boilers have dedicated air intake / flue gas exhaust kits and can be installed in sealed chamber configuration and forced draft or open chamber and forced draft (ideal outdoors in a partially protected place).
GUARANTEED SAVINGS AND HIGH COMFORT
The Immergas VICTRIX TT condensing boiler is managed in all its functions by a microprocessor which, together with the other devices, allows for particularly low gas consumption . The VICTRIX TT offers really high yields thanks to a modulation range that goes from 12 to 100%: this means that in mid-seasons or with reduced loads the boiler is able to reduce the flame up to 12% of the maximum to keep it constant. the temperature, in this way not only does not switch off but guarantees greater efficiency and silence , decreases in temperature changes and electricity consumption .
The VICTRIX 35 TT is equipped with a double exchanger : the primary one for the heating function is made of a thick aluminum, silicon and magnesium alloy which makes it particularly resistant to the corrosion typical of the acid condensates of this type of boiler; it also has a very large section with a thick pin inside which makes the heat exchange surface very high, thus ensuring high flow rates and heads as well as low clogging levels; the secondary exchanger for the sanitary circuit is in 18-plate stainless steel .
The combustion system is of the total premixing type and uses an inverted flame metalfibre burner; it is equipped with a spark plug and ionization control. Thanks to its modern technology, the burner always guarantees a high combustion efficiency and always keeps the combustion gas emission level low to limit pollution. The burner has an anti-freeze function which automatically starts boiler operation if the temperature drops near thermal zero and protects it down to an external temperature of -5 ° C. The gas valve is of the pneumatic type with double shutter, for maximum safety. The hydraulic unit includes a 3-way electric valve, the air separator and the high efficiency modulating circulator of the low consumption type with the anti-freeze anti-blocking system that automatically activates its operation when necessary. In heating, the circulator can operate both in "Auto" mode (possibility to set the variable speed based on the power supplied, therefore reduced electricity consumption) and in constant ΔT mode (variable speed to keep constant the ΔT set between the system delivery and return) and in "Fixed" mode, that is with constant speed (ideal for floor systems). In DHW, the circulator always works at maximum speed.
The smoke expulsion fan also has an automatic variable speed to help optimize combustion and reduce consumption.
For the combination with Immergas GAUDIUM SOLAR V2 solar systems, the boiler is already equipped with the solar delay timer which delays the production of domestic hot water while waiting for that coming from the solar system. This series of boilers can also be combined with hybrid systems with AUDAX heat pumps and Immergas solar thermal to make the most of renewable energy and further reduce consumption.
The self-diagnosis system continuously checks the operating parameters and combustion and always guarantees optimal boiler operation. With the external probe (optional), the boiler can adjust its operation based on changes in external temperatures and allows even greater gas savings.
The 10 l (7.1 l effective) expansion tank of this size is particularly useful in the case of replacement in existing systems with large quantities of water.
DIMENSIONS
Height: mm. 748 - Width: mm. 440 - Depth: mm. 255.
Weight Kg. 33.4
WARRANTY
The warranty is the Official Immergas one and has a duration of 24 months.
EVOLVED CHRONOTHERMOSTAT FANTINI COSMI C805OT
Note: if the
Fantini Cosmi C805OT chronothermostat is not available, it will be replaced by the
Fondital chronothermostat with the same design, the same features and functionality and equivalent price.
The
advanced Fantini Cosmi C805OT chronothermostat allows remote control of compatible boilers via the OpenTherm communication protocol. Combined with the latest generation condensing boilers, it allows you to reach
class A + as the chronothermostat is in
Class V (VI if combined with an external temperature probe) according to the ErP standard. Equipped with
7 function keys , the chronothermostat allows the management of the boiler in different modes: AUTOMATIC-MANUAL, SUMMER, WINTER, HEATING ONLY, OFF (with or without Antifreeze).
MAIN CHARACTERISTICS:
- Power supply via communication bus
- Temperature adjustment scale (day / night / manual): 5 ÷ 30 ° C
- Two settable room temperature levels: DAY and NIGHT
- Climatic regulator operation: ON - OFF, ROOM MODULATING and / or EXTERNAL, DISABLED
- Setting the DHW and heating temperature set-point
- Setting the dispersion coefficient set-point (kd)
- Weekly BOILER program
- Diagnostic messages
- Back-up function for data maintenance even in the event of a power failure
- Setting the boiler parameters (tsp)
- Dimensions (LxHxP): 108 x 84.4 x 30.4 mm.
WARRANTY
The guarantee is the official Fantini Cosmi guarantee and has a duration of 2 years.
IVAR THERMOSTATIC KIT 3/8" CONNECTION ON THE RADIATOR
Composed of:
Series T1500 thermostatic head for thermostatic and thermostatic valves on heating radiators.
The T1500 Series thermostatic head with incorporated liquid sensor is used in conjunction with IVAR valves for radiators.
Its pleasant design with clean lines allows it to integrate perfectly to complement any model of heating radiator and in any environment. It is mounted on the radiator water delivery management valve and replaces the water inlet adjustment knob; it is equipped with a sensitive liquid element of particular sensitivity which makes it extremely precise and reliable. The T1500 Series thermostatic head transforms the radiator water delivery adjustment knob into a real object for controlling the room temperature . It is equipped with a graduated scale that indicates the COLD position (corresponding to 6.5 ° C) and a further five intermediate adjustment positions with partials each of which corresponds to a temperature that reaches up to 28 ° C. It will therefore always be possible to easily set the desired temperature in the room where the radiator is installed. Contrary to the classic radiator valves that simply allow you to adjust the water inlet flow, the thermostatic head allows you to choose the desired temperature in the room so that, by continuously detecting the room temperature, it automatically adjusts the flow of water circulating in the room. radiator and always keeps the temperature constant . The advantages can be found in the considerable comfort it offers as by mounting them on all radiators it is possible to set the same temperature in all rooms and no longer feel temperature differences between one room and another or you can deliberately set different temperatures in the rooms and keep them that way. There is also an immediate energy saving that involves the use of the thermostatic valve which, by automatically regulating the flow of water in the radiator, avoids unnecessary waste of energy due to the usual bad adjustments of manual valves. The control is complete with a temperature limitation device and a set temperature locking device . It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C. The knob is made of PC and ABS in white RAL 9003 color, the ring nut is in nickel-plated brass, the cartridge and the control rod are in POM, the thermostat is liquid expansion. Installation is quick and easy; the dimensions are very small.
DIMENSIONS
Length: 77 mm - Diameter: 38 mm - Connection: M30 x 1.5
IVAR angle valve with thermostatic option with 3/8" connections for radiators
The 3/8" IVAR angle valve with thermostatic option is mounted on the heating radiators and has the function of managing the incoming flow of the system's vector liquid. It has a pleasant and discreet design that integrates well with all radiator models and in any environment. The 3/8" IVAR angle valve with thermostatic option expresses the particular care that IVAR dedicates to both the design and construction of the items.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the valve body allow it to be installed on all radiator models.
The valve body is in chromed brass, the shutter control rod is in stainless steel for particular efficiency and durability, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete a rubber ring that allows it to be fixed without using additional gaskets or hydraulic hemp.
It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
IVAR angle lockshield with 3/8" connections for radiators
The IVAR 3/8" square lockshield is mounted on the heating radiators and has the function of managing the outflow of the system vector liquid and achieving a perfect balance of the radiator in the heating system.
It has a pleasant and discreet design that integrates well with all radiator models and in any environment . The IVAR 3/8" square holder expresses the particular care that IVAR dedicates to both the design and construction of the items.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the body allow it to be installed on all radiator models.
The lockshield body is in chromed brass, the internal components are in stainless steel for a particular efficiency and durability, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete with a rubber ring which allows it to be fixed without using additional gaskets or hydraulic hemp, the cap is in white ABS RAL 9003.
It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
WARRANTY
The warranty is the official IVAR warranty of 2 years.
TR 4430 Fitting for IVAR copper pipe with 12X1 connections for valves and lockshields.
The IVAR copper pipe fitting is used to make the connection between the IVAR valve or holder and the 12X1 copper pipe that supplies the heating radiators. The IVAR copper pipe fitting is made with particular constructive care.
The body is made of brass for greater efficiency and durability, the hydraulic seals already incorporated are made of EPDM, the hose ring is made of brass.
It can be used with a carrier fluid temperature range from 0 to 95 ° C and max working pressure: 10 bar.
Installation is also quick because it does not require additional elements such as gaskets or hydraulic hemp; the dimensions are very small.
DIMENSIONS
Connections Ø 12X1 on the copper pipe.
WARRANTY
The warranty is the Official IVAR one and has a duration of 2 years.
