Immergas Victrix Tera 28 condensing boiler - 15.3 l./min. - Methane gas.
28 Kw - Ideal for heating up to 200 square meters. with an average height of about 2.7 meters
THE BOILER
The Immergas VICTRIX TERA condensing boiler is one of the basic models of the brand but is already among the most popular products on the market in the sector. It is an article with a great balance, designed and built with the best technical devices; fully respects the limits on pollution. It has a simple and particularly pleasant aesthetic, refined on the front panel with the beautiful vertical rib in relief that gives the line impetus and elegance and with the lower part that houses the command and control area with a slightly retro taste. It satisfies all types of installation because it is designed to be installed outdoors in places partially protected from bad weather, or recessed inside the special Immergas “Omni Container” (optional), or obviously indoors. It is available in two power cuts. VICTRIX TERA is equipped with very modern electronics, already able to integrate with a solar panel system . It produces domestic hot water with a dedicated plate exchanger.
The lower panel includes the programming and control keys with which it is possible to set all the operating parameters of the boiler; the backlit liquid crystal display communicates the active functions and any malfunctions; with the pressure gauge on the right side of the panel it is possible to constantly monitor the system pressure parameters. By purchasing the specific Interface Card Kit (optional) separately, the boiler can be managed through the Dominus App via smartphone or tablet.
VICTRIX TERA fully complies with the ErP (Energy Related Product) Directive which dictates the requirements that all equipment that uses electricity and therefore Energy Efficiency must have.
The compact size allows it to be installed anywhere, even where spaces are limited.
GUARANTEED SAVINGS AND HIGH COMFORT
The Immergas VICTRIX TERA condensing boiler is managed in all its functions by a microprocessor which, together with the other devices, allows for particularly low gas consumption . It is equipped with a double exchanger ; the primary exchanger with single-pipe stainless steel coil for the heating function and the secondary exchanger in stainless steel with 14 plates for the domestic hot water circuit. The combustion system is of the total premix type and uses a cylindrical steel burner ; it is equipped with a spark plug and ionization control. Thanks to its modern technology, the burner always guarantees a high combustion efficiency and always keeps the combustion gas emission level low to limit pollution. The burner has an anti-freeze function which automatically starts boiler operation if the temperature drops near thermal zero and protects it down to an external temperature of -5 ° C. The gas valve is of the pneumatic type with double shutter, for maximum safety. The hydraulic unit includes a 3-way electric valve, the air separator and the high efficiency modulating circulator of the low consumption type with the anti-freeze anti-blocking system which automatically activates its operation when necessary. The smoke expulsion fan also has an automatic variable speed to help optimize combustion and reduce consumption. For the combination with solar systems, the boiler is already equipped with the solar delay timer which delays the production of domestic hot water while waiting for that coming from the solar system.
The self- diagnosis system continuously checks the operating parameters and combustion and always guarantees optimal boiler operation. With the External Probe (optional), the boiler can adjust its operation based on changes in external temperatures and allows even greater gas savings.
DIMENSIONS
Height: mm. 748 - Width: mm. 440 - Depth: mm. 256.
Weight Kg. 35.5
WARRANTY
The warranty is the Official Immergas Italia one, it has a duration of 24 months.
EVOLVED CHRONOTHERMOSTAT FANTINI COSMI C805OT Note: if the
Fantini Cosmi C805OT chronothermostat is not available, it will be replaced by the
Fondital chronothermostat with the same design, the same features and functionality and equivalent price. The
advanced Fantini Cosmi C805OT chronothermostat allows remote control of compatible boilers via the OpenTherm communication protocol. Combined with the latest generation condensing boilers, it allows you to reach
class A + and re-enter the
65% Ecobonus tax deduction as the chronothermostat is in
Class V (VI if combined with an external temperature probe) according to the ErP standard. Equipped with
7 function keys , the chronothermostat allows the management of the boiler in different modes: AUTOMATIC-MANUAL, SUMMER, WINTER, HEATING ONLY, OFF (with or without Antifreeze). MAIN CHARACTERISTICS: - Power supply via communication bus - Temperature adjustment scale (day / night / manual): 5 ÷ 30 ° C - Two settable room temperature levels: DAY and NIGHT - Climatic regulator operation: ON - OFF, ROOM MODULATING and / or EXTERNAL, DISABLED - Setting the DHW and heating temperature set-point - Setting the dispersion coefficient set-point (kd) - Weekly BOILER program - Diagnostic messages - Back-up function for data maintenance even in the event of a power failure - Setting the boiler parameters (tsp) - Dimensions (LxHxP): 108 x 84.4 x 30.4 mm.
WARRANTY
The guarantee is the official Fantini Cosmi guarantee and has a duration of 3 years.
IVAR THERMOSTATIC KIT 3/8 CONNECTION ON THE RADIATOR Composed of:
Series T1500 thermostatic head for thermostatic and thermostatic valves on heating radiators. The T1500 Series thermostatic head with incorporated liquid sensor is used in conjunction with IVAR valves for radiators.
Its pleasant design with clean lines allows it to integrate perfectly to complement any model of heating radiator and in any environment. It is mounted on the radiator water delivery management valve and replaces the water inlet adjustment knob; it is equipped with a sensitive liquid element of particular sensitivity which makes it extremely precise and reliable. The T1500 Series thermostatic head transforms the radiator water delivery adjustment knob into a real object for controlling the room temperature . It is equipped with a graduated scale that indicates the COLD position (corresponding to 6.5 ° C) and a further five intermediate adjustment positions with partials each of which corresponds to a temperature that reaches up to 28 ° C. It will therefore always be possible to easily set the desired temperature in the room where the radiator is installed. Contrary to the classic radiator valves that simply allow you to adjust the water inlet flow, the thermostatic head allows you to choose the desired temperature in the room so that, by continuously detecting the room temperature, it automatically adjusts the flow of water circulating in the room. radiator and always keeps the temperature constant . The advantages can be found in the considerable comfort it offers as by mounting them on all radiators it is possible to set the same temperature in all rooms and no longer feel temperature differences between one room and another or you can deliberately set different temperatures in the rooms and keep them that way. There is also an immediate energy saving that involves the use of the thermostatic valve which, by automatically regulating the flow of water in the radiator, avoids unnecessary waste of energy due to the usual bad adjustments of manual valves. The control is complete with a temperature limitation device and a set temperature locking device . It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C. The knob is made of PC and ABS in white RAL 9003 color, the ring nut is in nickel-plated brass, the cartridge and the control rod are in POM, the thermostat is liquid expansion. Installation is quick and easy; the dimensions are very small.
DIMENSIONS
Length: 77 mm - Diameter: 38 mm - Connection: M30 x 1.5
IVAR angle valve with thermostatic option with 3/8 connections for radiators The 3/8 IVAR angle valve with thermostatic option is mounted on the heating radiators and has the function of managing the incoming flow of the system's vector liquid. It has a pleasant and discreet design that integrates well with all radiator models and in any environment. The 3/8 IVAR angle valve with thermostatic option expresses the particular care that IVAR dedicates to both the design and construction of the items.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the valve body allow it to be installed on all radiator models.
The valve body is in chromed brass, the shutter control rod is in stainless steel for particular efficiency and durability, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete a rubber ring that allows it to be fixed without using additional gaskets or hydraulic hemp.
It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
IVAR angle lockshield with 3/8 connections for radiators The IVAR 3/8 square lockshield is mounted on the heating radiators and has the function of managing the outflow of the system vector liquid and achieving a perfect balance of the radiator in the heating system.
It has a pleasant and discreet design that integrates well with all radiator models and in any environment . The IVAR 3/8 square holder expresses the particular care that IVAR dedicates to both the design and construction of the items.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the body allow it to be installed on all radiator models.
The lockshield body is in chromed brass, the internal components are in stainless steel for a particular efficiency and durability, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete with a rubber ring which allows it to be fixed without using additional gaskets or hydraulic hemp, the cap is in white ABS RAL 9003.
It can be used with ambient temperatures with a maximum limit of 50 ° C; carrier fluid temperature range up to 100 ° C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
WARRANTY
The warranty is the official IVAR warranty of 2 years.
TR 4430 Fitting for IVAR copper pipe with 12X1 connections for valves and lockshields. The IVAR copper pipe fitting is used to make the connection between the IVAR valve or holder and the 12X1 copper pipe that supplies the heating radiators. The IVAR copper pipe fitting is made with particular constructive care.
The body is made of brass for greater efficiency and durability, the hydraulic seals already incorporated are made of EPDM, the hose ring is made of brass.
It can be used with a carrier fluid temperature range from 0 to 95 ° C and max working pressure: 10 bar.
Installation is also quick because it does not require additional elements such as gaskets or hydraulic hemp; the dimensions are very small.
DIMENSIONS
Connections Ø 12X1 on the copper pipe.
WARRANTY
The warranty is the Official IVAR one and has a duration of 2 years.
