Klover Belvedere 20 26 kW Idro wood stove + ACS kit Bordeaux Lucido

Klover Belvedere 20 26 kW Idro wood stove + ACS kit Bordeaux Lucido

Nominal heat output of 25.7 kW (17.7 kW water)

Ideal for heating up to 200 m2 with an average height of 2.7 m

The Klover Belvedere 20 wood stove contains technology, practicality and quality in a single product capable of guaranteeing energy performance up to class A+ and certified 4-star environmental class.

This wood-burning thermo stove is among the best performing in its category with a guaranteed efficiency of 85.1% and a nominal thermal power of 25.7 kW (17.7 kW water); through the combustion of wood it produces technical hot water intended to power the domestic heating system and also instant domestic hot water for the bathrooms and kitchen.

Idro wood stoves are an effective method for heating your home using a natural fuel that has less impact on CO 2 emissions and a low cost. This type of stove is certainly an excellent investment for those who need to heat their rooms and at the same time manage consumption , saving on energy costs ; the Belvedere 20 performs this task very well as it is powered by one of the cheapest and most easily available fuels, a feature that allows you to save on electricity and gas bills, also allowing you to evaluate and balance costs and domestic needs.

DESIGN

The Belvedere 20 wood stove is a contemporary stove, easy to fit into any environment. Front and upper cladding in majolica and sides in steel , in this glossy burgundy colored version it is extremely captivating and catalysing. The front part houses a control display , a large door with double ceramic glass particularly suitable for children and the elderly because this type of glass is fireproof, therefore it avoids burns following contact and in the same context the cold handles are placed, furthermore, it houses a particularly large ash collection compartment which simplifies cleaning operations. Everything is enhanced by the sight of the fire which evokes the evocative atmosphere of a natural flame fireplace and gives the ideal warmth to constantly feel comforted in your home spaces.

TECHNOLOGY, COMFORT AND SAVINGS GUARANTEED

The Klover Belvedere 20 wood stove represents everything you could ask for from a hydro product: technology, savings, eco-sustainability and comfort, enclosed in an article capable of energy performance up to class A+ and classified as a 4-star environmental class, particularly high certifications for a wood-fired product, without forgetting that Klover has always been one of the most reliable brands in relation to quality, technicality and safety when it comes to Thermo installations all over the world.

There are many technical features that make this wood stove one of the best on the market: the quality of the materials, the durability and the Klover brand technology which have made this brand, undeniably, one of the leaders in thermo-hydraulics. In this regard, certainly worthy of priority mention is the innovative Sicuro Top system patented by Klover: the Sicuro top system also allows installation in a pre-existing system with a boiler which is normally equipped with a closed expansion vessel; using the "bain-marie" principle, therefore without the need to use external exchangers or an open vessel, the Sicuro top system guarantees total safety in all conditions of use, the pressure in the boiler body is equal to zero and there are no risks of water boiling even in the absence of electricity, condensation phenomena are eliminated. There are two stainless steel exchangers : the primary one for the heating circuit is managed by the circulator while the secondary one for the DHW circuit is directly connected to the DHW circuit.

Further technical characteristics concern: the standard equipment of a high efficiency electronic circulator which allows the stove's performance to be optimized by minimizing its energy consumption based on the actual demands of the system, simultaneously bringing about a considerable reduction in costs and greater control of performance stove generic; double centrifugal ventilation which does not remove heat from the heating system; fire door with double high temperature ceramic glass and cold handles in micro-cast steel which facilitate use, making it safe and protected; large, easy to clean and spacious ash collection drawer and cold start starter system designed to concretely offer maximum comfort and maximum levels of practicality.

Furthermore, the attention to heat and its protection as well as the intent to guarantee the greatest efficiency with the greatest guarantees, have always pushed towards the use of high quality components: in fact, this stove is equipped with sock gaskets made of highly insulating steel with an incredible seal; thermostatic valve for controlling the combustion air which allows you to limit fuel consumption by optimizing the overall yield both in terms of heating and duration of the wood; Plus hydraulic kit as standard and domestic hot water production instant; wiring entirely covered in anti-wear, anti-cut and very high temperature resistance fiberglass and cast iron fire surface and side walls.

The smoke outlet is located in the upper part of the stove body with a diameter of 150 mm and all the hydraulic components are easily accessible in order to facilitate installation and maintenance operations. It has a guaranteed efficiency of 85.1%, an estimated wood consumption of min-max 1-4.6 kg/h and has a nominal heat input of 30.3 kW and a nominal heat output of 25.7 kW ( of which 17.7 kW water-based), therefore it is undoubtedly powerful and high-performance.

To manage the Belvedere 20 stove, on the upper front part, there is an electronic control unit which incorporates a series of functions that can be activated in a simple and intuitive way, including the management of the circulator/DHW/coupled boiler; further details and technical characteristics, also regarding installation, can be viewed via the technical data sheet and instruction booklet supplied with the product.

The installation must be carried out by expert and authorized technical personnel .

DIMENSIONS

- Stove body dimensions: Width 600 mm_ Height 1180 mm_ Depth 560 mm

- Combustion chamber dimensions: Width 340 mm_ Height 350 mm_ Depth 390 mm

- Weight 350 kg

WARRANTY

The warranty is the official Klover one and lasts 2 years.