Immergas Victrix 24 TT ErP condensing - 11.3 l / min.
METHANE, LPG AND PROPANATE AIR SUPPLY - AUTOMATICALLY RECOGNIZES THE TYPE OF GAS
21 kW - Ideal for heating up to 130 square meters with an average height of about 2.7 m
Code 3.025636
THE BOILER
The Immergas VICTRIX TT ErP is a wall-mounted condensing boiler with truly innovative technological features: it is characterized in fact by a condensing module in special alloy which makes it particularly resistant to corrosion ; its geometric characteristics also ensure high flow rates and heads as well as low clogging levels. Another innovative feature is the advanced electronic board that allows, among other things, to set the type of gas without changing the nozzles: the boiler can operate on natural gas , LPG or propane air simply by setting the appropriate parameters from the board during the first ignition phase. . The high efficiency modulating circulator guarantees really low consumption by being able to operate at variable or fixed speed . The VICTRIX TT ErP offers very high yields thanks to a modulation range ranging from 15 to 100%. In energy class A both for heating and for the production of domestic hot water, and with levels of polluting emissions from class NOX6 , the VICTRIX TT ErP is an "ecological" boiler capable of offering maximum energy savings and very low emissions.
The VICTRIX TT ErP has a simple and pleasant aesthetic, refined on the front panel with the beautiful vertical rib in relief that gives the line momentum and elegance, the corners of the mantle are rounded at 45 degrees and the lower part houses a command and control area with a slightly retro taste: comfortable knobs and buttons in relief for setting all functions and checking malfunctions, backlit LCD display and visible pressure gauge for easy pressure control. The control area cover can be removed to allow direct access to the electrical connection compartment.
All this in a depth of just 28 cm which makes the VICTRIX TT ErP a versatile boiler, suitable for any type of installation and ideal for replacing old boilers even with ducting in collective flues. Designed to be installed indoors , it can also be placed outdoors in places partially protected from bad weather thanks to its IPX5D degree of protection and the standard antifreeze device (standard protection down to -5 ° C; up to -15 ° C with optional kit) or recessed in the special Immergas “Solar Container” (optional).
The boiler is designed to be combined with temperature controllers even with wireless operation and for the use of the Immergas DOMINUS app which allows complete remote control via smartphone or tablet.
VICTRIX TT ErP boilers have dedicated air intake / flue gas exhaust kits (sold separately) and can be installed in sealed chamber and forced draft configuration or open chamber and forced draft (ideal outdoors in a partially protected place).
GUARANTEED SAVINGS AND HIGH COMFORT
The Immergas VICTRIX TT ErP condensing boiler is managed in all its functions by a microprocessor which, together with the other devices, allows for particularly low gas consumption . The VICTRIX TT ErP offers very high yields thanks to a modulation range that goes from 15 to 100%: this means that in mid-seasons or with reduced loads the boiler is able to reduce the flame up to 15% of the maximum to maintain the temperature is constant, in this way not only does it not switch off but guarantees greater efficiency and silence , thermal shocks and electricity consumption decrease .
The VICTRIX 24 TT ErP is equipped with a double exchanger : the primary one for the heating function is made of a thick aluminum, silicon and magnesium alloy which makes it particularly resistant to the corrosion typical of the acid condensates of this type of boiler; it also has a very large section with a thick pin inside which makes the heat exchange surface very high, thus ensuring high flow rates and heads as well as low clogging levels; the secondary exchanger for the sanitary circuit is in 12-plate stainless steel .
The combustion system is of the total premixing type and uses an inverted flame metalfibre burner; it is equipped with a spark plug and ionization control. Thanks to its modern technology, the burner always guarantees a high combustion efficiency and always keeps the combustion gas emission level low to limit pollution. The burner has an anti-freeze function which automatically starts boiler operation if the temperature drops near thermal zero and protects it down to an external temperature of -5 ° C. The gas valve is of the pneumatic type with double shutter, for maximum safety. The hydraulic unit includes a 3-way electric valve, the air separator and the high efficiency modulating circulator of the low consumption type with the anti-freeze anti-blocking system which automatically activates its operation when necessary. In heating mode, the circulator can operate both in "Auto" mode (possibility of setting the variable speed based on the power supplied, therefore reduced electricity consumption) and in "Fixed" mode, that is with constant speed (ideal for underfloor systems). In DHW, the circulator always works at maximum speed.
The smoke expulsion fan also has an automatic variable speed to help optimize combustion and reduce consumption. For the combination with solar systems, the boiler is already equipped with the solar delay timer which delays the production of domestic hot water while waiting for that coming from the solar system.
The self-diagnosis system continuously checks the operating parameters and combustion and always guarantees optimal boiler operation. With the external probe (optional), the boiler can adjust its operation based on changes in external temperatures and allows even greater gas savings.
DIMENSIONS
Height: mm. 748 - Width: mm. 440 - Depth: mm. 280.
Weight Kg. 32
WARRANTY
The warranty is the Official Immergas one and has a duration of 24 months.
